Oem Rubber O Seal Compression Molding Fkm Silicone Red Heat Resistance Part

Chinese OEM rubber factory compression molding FKM silicone red heat resistance seal part

Rubber Seal product details:

Rubber Seal product materials:

Materials : NR , SBR , BR , IIR , EPDM , CR , XNBR , NBR , HNBR , PU , CSM , ACM(PA) , ECO , VAMAC , SIL , FSIL , FPM / FKM.

Silicone:The term silicone covers a large group of materials in which vinyl-methyl-silicone (VMQ) is often the central ingredient. Silicone elastomers as a group have relatively low tensile strength, poor tear and wear resistance. However, they have many useful properties as well. Silicone has a good heat resistance, good cold flexibility, and good ozone and weather resistance as well as good insulating and physiologically neutral properties.

Buna:Buna-N O-Rings / Nitrile O-Rings / NBR: Buna-N O-Rings are the most widely used o-ring material in the world because of low cost, good mechanical performance with resistance to water, most basic oils, lubricants and some fuels, many pneumatic, hydraulic systems, propane, natural gas and the default choice for basic applications. Buna-N o-rings are not recommended for exposure to sunlight, UV light, ozone and general outdoor weathering or hash chemicals, acids, keytones and many others.

Lowest cost highest inventory general purpose commodity NBR compound. Compare to Parker N1470-70 and N0674-70 and Parco 4200-70 and 4900-70.

Applications: General purpose sealing, Air Tools, Hydraulic fluids, Petroleum based oils, fuels, L.P. gases, Cold Water, Silicone greases and oils, Di-ester base lubricants (MIL-L-7808), Ethylene glycol base fluids (Hydrolubes) and Hydraulic Fluidsand in static and dynamic applications.

Avoid: Brake fluids, ozone and UV light

EPDM:Ethylene-Propylene / EPDM O-Rings: Ethylene propylene rubber is an elastomer prepared from ethylene and propylene monomers (ethylene propylene copolymer). Our stock O-Ring compoundare made with an amount of a third (diene) monomer (ethylene propylene diene terpolymers). Ethylenepropylene-diene rubber (EPDM) produced using a third monomer and is particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol base. EPDM has outstanding resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight; but it is not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. This popular rubber compound is usually the first choice for low torque drive belt applications.

Applications: Cold and Hot Water, Steam up to 300°F (149°C), Various Water / Municipalities Applications, Household Appliances, Glycol based brake fluids up to 300°F (149°C), Many organic and inorganic acid, Cleaning agents, soda alkali, potassium alkali, Phosphate-ester based hydraulic fluids (HFD-R), Silicone Oil, Silicone Grease, Many polar solvents (alcohols, ketones, esters), Ozone resistant, aging resistant, weather resistant, Outdoor Applications and Electrical Insulators..

Avoid: Mineral oil products (oils, greases and fuels), Solvents, Aromatic Hydrocarbons, Liquefied Petroleum Gas (LPG), Lubricating Oils, Petroleum Base Gasoline

NBR is mainly used to manufacture oil resistant rubber products. Acrylonitrile content in nitrile butadiene rubber (%) has 42 ~ 46, 36 ~ 41, 31 ~ 35, 25 ~ 30, 18 ~ 24 and other five kinds. The more acrylonitrile content, the better oil resistance, but cold resistance is decreased. It can be used in 120℃ air or 150℃ oil for a long time. In addition, it also has good water resistance, air tightness and excellent bonding properties. It is widely used to produce all kinds of oil-resistant rubber products, a variety of oil-resistant gaskets, gaskets, bushing, flexible packaging, flexible hose, printing and dyeing roller, cable adhesive materials, etc. It has become an indispensable elastic material in automobile, aviation, petroleum, photocopying and other industries.

Rubber Seal factory advantage:

Splendid Rubber Products (Shenzhen) Co., Ltd. is located in Pinshan Town, Longgang District, Shenzhen City, Guangdong Province. Our Investment is 10 million RMB and the factory area is 10,000 square meters. With over 500 employees, our team works hard to maintain the highest standards of quality and serve the needs of our customers. At YuanMao (Splendid), our business philosophy is based on the principles of honesty, service, quality, hard work, fairness and team effort. Our main business focuses on the design, development, manufacture and the related mold development of rubber products. We mainly produce rubber molded parts, O-rings, and other rubber accessories. They are used for sealing valves of oil, air, and water or as the absorbers. We also offer custom molded products, which are manufactured by the samples from our customers. We have been certified by 2002-edition ISO/TS16949 from October 2003, we also got KTW, DVGW, WRAS, and NSF certifications for compound E7001Z59 in 2008. We have an extensive selection of materials available to meet ASTM, JIS, DIN, NSF, and other specifications. All of our products are backed by our ISO/TS16949 registered systems. Splendid meets TS16949 standards. Supporting documentation, PPAP control plans and FMEA are available upon request. We take quality very seriously; and that's our guarantee. ur compound N7001 is UL listed material --JML U2 We have cooperated with Trelleborg, Eriks, Parco, Mcmaster, Prosel etc. For many years, our turnover is over US$ 14 million.

Rubber Seal factory certificates:

Approvals : SGS , NSF , KTW , WRAS , UL , FDA etc . Special requirement is available.

NSF : NSF is specialized in standard setting, product testing and certification services in the fields of public health, safety and environmental protection, and is an authoritative body in the field of public health and safety

KTW : The supplier is required to comply with DVGW (German Gas and Water Association) Regulation W 270 "Propagation of microorganisms on Non-metallic materials". This standard mainly protects drinking water from contamination with biological impurities. All drinking water systems and excipients exported to Europe must be KTW certified. Therefore, if Chinese drinking water systems and excipients are to be exported to European countries, they must pass KTW certification. KTW has been authorized by the World Health Organization (WHO) for the certification of safe drinking water.

WRAS : WRAS(Water Regulations Advisory Scheme) certification refers to the Water Regulation Advisory Scheme. WRAS is the certification of the safety of drinking Water in the UK.

UL : Founded in 1894, UL has become one of the world's leading testing and certification organizations with a complete set of management systems, standard development and product certification procedures.

SGS:SGS certification refers to the service that SGS performs compliance certification on targets according to standards, regulations, customer requirements and other conditions. To carry out relevant certification, we must pass inspection, testing, authentication, certification and other means (SGS certification itself is not a certification, but refers to the certification service of SGS)

Rubber Seal product application:

O Ring seal :O rings are the most widely used seal in industry because they offer amazing value. They are both inexpensive and very effective. They are also incredibly versatile. They are suitable for both static and dynamic applications. If you are shopping for these seals, it is important to ask what material an O ring is made of before purchasing it. They are made with a variety of elastomer materials suitable for different environments and temperatures, and it is important to choose one made with a material that is appropriate for the purpose.

O rings are ideal for static applications such as pipes, cylinders, flanges and plates. Their static applications include both industrial and personal uses. In addition to machinery, they can be used in cameras, refrigerators, scuba gear and even the tap at the local pub.

The beauty of O rings is their simplicity. Simple is often better. Their one-piece construction means they are sturdier and less can go wrong. It also makes them easy to fit, but O rings do not last forever. In industrial settings, if an O ring wears out, it impacts productivity. That loss can be minimized, however, by maintaining a supply of replacement O-rings in the appropriate sizes so that if one goes, it can be replaced immediately.

Material Selection for Rubber O Rings

Temperature Resistance

The temperature resistance of a rubber O ring is dependent on the type of rubber used to manufacture it. In general, there are three types of temperature criteria, which are:

High: Rubber O rings made of Viton, FFKM, Kalrez, and Silicone are able to withstand temperatures up to 350˚C, a characteristic that is important for aerospace applications.

Moderate: Rubber O rings made of HNBR and peroxide cured EPDM are good for temperatures up to 150˚C.

Low: Silicone O-rings can resist temperatures of – 60˚C without losing their properties.

FAQ

1. Are you a manufacturer or a trading company?
We are the professional manufacturer of Rubber seal, providing one-stop OEM & ODM service to all the partners all over the world.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.What can you buy from us?
Rubber O Rings,Rubber Washer,Rubber Diaphragm,Grommet,Ball,Rubber Seal Parts,Rubber Wares

4. Why should you buy from us not from other suppliers?
We are the Taiwanese manufacture which specializes in rubber O-rings, washers , seals, rubber molded parts, rubber bonded with metal products, the material we can produce are NBR, EPDM, FKM, HNBR, Silicone, Flurosilicone, Vamac etc w/18 year's experience

5. What services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW；
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Cash;
Language Spoken:English,Chinese