|
[China]
Trade Verify
Address: Xingyang Longgang Development Zone
Contact name:Billie
Henan Tongda Heavy Industry Science And Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Organic Fertilizer Fermenting Equipment Waste Composting Machine Manure Fermentation Tank
The basic principle of a horizontal fermentation tank for organic fertilizer is high-temperature aerobic fermentation, which can be used to treat various organic waste such as animal manure, organic waste residue, and crop straw. The harmless treatment process can be completed in about 10 hours. As a new generation equipment in the organic fertilizer industry, the rapid fermentation tank has changed the traditional pool fermentation process, greatly improving production efficiency, and taking the production of organic fertilizer products to a higher level.
The organic fertilizer horizontal fermentation tank controls the temperature between 65-75 ℃ through ventilation, oxygenation, and stirring, achieving the temperature for material fermentation treatment. When the temperature is reached again, it can cause a large number of pathogenic bacteria and parasites in the pile to die. At the same time, the deodorization system is used to treat the emitted gas with biological odor, achieving the goal of harmless treatment. The product obtained from high-temperature aerobic fermentation can be used for soil improvement, landscaping, landfill cover soil, etc.
Advantages of horizontal fermentation tank products:
1. Low energy consumption: Energy conservation and emission reduction, low energy
consumption. High temperature aerobic fermentation has a short
fermentation cycle, small floor area, and high degree of
automation.
2. Fast fermentation speed: Under normal circumstances, fermentation is completed in 7 days,
with wide adaptability, suitable for both north and south, and not
affected by temperature.
3. Wide applicability: suitable for uniformly mixing powders and liquids of various
components.
4. Low material residue: The powder material adopts a pneumatic large door structure, which
has fast unloading and no residue.
5. Customized support: 5-50M3 fermentation tanks with different capacities and forms
(horizontal, vertical) can be customized according to customer
needs.
| Model | Heating Power(kw) | Stirring Power(kw) | Reducer Model | Stirring Speed(r/min) | Dimensions(mm) |
| 15m³ | 30 | 22 | ZQD850-291.19 | 3.4 | 6000*2600*2800 |
| 20m³ | 30 | 37 | ZQD850-163.38 | 6 | 7400*2820*3260 |
Horizontal fermentation tank structure:
Firstly, the material to be fermented is fed into the fermentation
tank through a belt conveyor from the feeding port. While feeding
the material, the main motor is started, and the main shaft is
driven by the motor reducer to start stirring. At the same time,
the spiral blades on the stirring shaft flip the animal material,
allowing the material to fully contact the air and start the
aerobic fermentation stage of the material to be fermented.
Secondly, the heating system of the bottom electric heating rod is
controlled by the electric box to start heating the thermal oil in
the interlayer of the fermentation tank. At the same time, the
temperature of the tank is regulated by a temperature sensor to
control the temperature of the fermentation tank in a good state
required for fermentation. After the material fermentation is
completed, the tank is discharged through the discharge port for
the next processing step.
FAQ:
Q: Can I use this production line to produce multi granularity
particles?
Yes, our production line is multifunctional. We can customize ring
moulds of different sizes. In this way, you can easily adjust the
size of your ball.
Q: I know little about the fertilizer production line. How to
choose the most suitable machine?
Just tell us your raw materials, capacity (tons / hour) and the
size of the final particle product, and we will choose the machine
for you according to your specific situation.
Q: Our workers don't know how to operate the production line. What
should I do?
Our engineers will guide on-site workers on how to install machines
and build workshops. Then, our engineers will test the production
line on site and train your workers how to operate it.
Q: Are you a trading company or a manufacturer?
We have a large factory in Jiaozuo, China, covering an area of
10000 square meters. Welcome to visit.
Q: What's the Production Period of the Fertilizer Machine?
For single fertilizer machine, our production time is 7 days;and
for whole fertilizer production line, our production time is no
more than 30 days.
Q: What's the Quality Guarantee and Certifications?
all of our machine have passed ISO and CE certification, we can
guarantee the highest quality and our warranty time is 5 years
after shipment date.
