Shijiazhuang Hanjiu Technology Co.,Ltd |
Verified Suppliers
|
|
Hydraulic Gear Motor/ Pump, 5/8" Shaft SAE A 2 Bolt, Same as
CB2A-F11SA
Gear Pump, SAE A 2-bolt Mounting / 4-bolt Mounting. 04/ 06/ 08/ 10/
12/ 14/ 16/ 20/ 25 ml displacement. 6 GPM (Gallons/minute) at 2000
RPM.
This pump/ motor consists of a gear pair supported by two aluminum
bearing blocks, a housing, front cover and rear cover. The axis
clearance can be automatically compensated by the bearing blocks.
This pump/ motor features high mechanical and volumetric
efficiency, low noise, high reliability as well as a high power to
weight ratio.
SPECIFICATIONS
APPLICATIONS
Hanjiu Gear Motor/ Pumps widely used on Agricultural tractors,
Harvesters, Garden Tractors, Dump Trucks, Forklifts, Combine
Harvesters, Fishing, Sweepers, Water Tanks, Trailers, Crane, Truck
Crane, Excavators, Loaders, Earth Movers, Machine Tool, etc.
Used on tractor of Belarus, , David Brown, Deutz, Fendt, Fiat, Ford, , Lamborgini,
Massey Ferguson, New Holland, Same, etc.
PAYMENT
SHIPPING
Warranty
RETURNS
ABOUT US
This CBT type is our best seller to global market, today i
introduce motor CBT series to you:
CBT series gear motor/ pumps are external motors with axial
compensation and radial balancing. They are widely applied in
hydraulic system of Agricultural & Tractor and Engineering
Trucks.
CBT series gear motor/ pumps can be provided with various kinds of
mounting glanges, shaft ends and connection styles of inlet and
outlet. Please refer to the table below. This series of motor/ pump
can be made as side-in and rear-out, rear-in and side-out. CBT
motor/ pump can also be combined as a relief pump with safety
valve, or as a constant flow pump with constant flow valve.
1 | Gear Pump |
2 | Body Code |
3 | Pressure: 16MPa |
4 | Module of Gear: m=3 |
5 | Norminal Displacement (ml/r): 04, 06, 08, 10, 12, 14, 16, 18, 20, 25 |
6 | port connection: F: flange connection (90°, 4-M8, distribution circleφ38) F3: flange connection(90°, 4-M6, distribution circleφ40) , F5: flange connection (45°, 4-M8, distribution circleφ38) , If displacement is 20ml/r, the distrbution circle is φ50) S: metric thread connection (only for 2#front cover) |
7 | Shaft ends: None: four-teeth rectangle splined shaft key (4D-15f9x11.4b12x4f9) E1: straight keyed shaft (Φ 16, C5x28) B: flat shaft (Φ 15, flat 8) B1: flat shaft (Φ 18, flat 8) S3: straight keyed cone (1:10Z4, key B6x14) |
8 | Rotation (looking from the shaft end): L: Left R: Right |
9 | Mounting flange type (front cover code): 1: rhombic (spigot Φ82.55, 2-Φ11,distance 106); 2: four-hole quadratic (spigot Φ38, 4-Φ9,distance 70x100, thick 13); 4: two-hole random (spigot Φ38,2-Φ11, distance 60x60); 11: four-hole quadratic (spigot Φ38,4-Φ9,distance 70x100, thick 18) (special order acceptance) |
Please do not hesitate to contact us for further information,
inquiries or orders.
Thank you for choosing 'Hanjiu' Hydraulics.