China Kingmax Industrial Co.,ltd. |
Verified Suppliers
|
|
Konmax Cold Drink Dispenser Description:
Hotel ,restaurant,store , supermarket,drink bar etc
Konmax Cold Drink Dispenser Specification:
Material | Stainless steel R304 | Machine size | 480*460*740MM |
power | 280/600W | Packing size | 510*470*750MM |
Cold-beverage temperture | 7 to 12 degree | Hot-beverage temperature | 52 to 58 degree |
Tank material | PC | Model | LSJ 18 LX2 |
Condenser | with Copper tube | Certificate | CE |
switch | LCD switch | Packing Way | Carton +foam inside |
Electrics Standard | 110V-220V,50-60HZ | Drive Mode | Magnetic rotating |
G.W | 31KG | N.W | 29KG |
40' HQ loading | 425PCS | FOB Shanghai | USD |
20' FT loading | 165PCS | Warranty | 1 Year |
Konmax Cold Drink Dispenser Detailed Photo:
Food Grade PC tank to hold the liquid and it is safe to drink
You can choose mixing or spraying function
Temperature you can choose hot , cold , cold& hot function
Water drip tray to prevent the juice outside and easy to clean
Konmax Cold Drink Dispenser Installing Methods:
1: To install it ,pls choose the site which is flat,fixable and can
avoid the direct sunshine in sunmmer.
2:Around the juicer, should have 150mm up room to make the air
circulating and make sure the machine can run effectively.
3:Before installing, pls check the supply whether confirm the
requirements or not. The power supply cable is not too thin or too
long. The cross section of cable should be 1.5-2.5mm, Voltage is
mounted on the fixed position with fuse which will keep the users
safety,it must have reriable grounding. The socket should be
mounted on the fixed position with fuse which keep the machine
running safety.
4;To make the fix position for juicer,should make its frond lower
and back higher(to ajust the foot of bottom can do it), then the
water in the salver can flow into the box through the hose.
Konmax Cold Drink Dispenser How to use ?
1. To fall prepared beverage into the crock , the height of it is
should not exceed the standard height (9L-12L-18L-20L-50L),
otherwise the beverage will flow into the churn-dasher from the
dasher tube,which will make the dasher burn .
2. The temperature of the beverage should not too high (not exceed
35), otherwise it will make bad effection for the refrigeration .
3. Plug in the supply power to the 3 hole socket , the grounding
hold should connect with the protecable wire or fixture to ensure
the safety .
4. To turn the switch on the position of refrigeration , press down
the refrigeration switch , the compressor fan starts running and
refrigeration system starts working . Then start the dasher to mix
or start the spewing swtich to spew.
5.When the beverage becomes to the suitable temperature , please
make the cup against the push board lightly .the beverage will flow
into the outlet mouth .
6.when the temperture reduces to the certain degree , the
refrigeration will stop running because of the influence from the
temperature cotroller .And when it increases, it will start
automatically again .
7.It should re-start after 5 minuters if it turn off suddenly or
stop temporarily .otherwise it will damage the compressor .
Konmax Cold Drink Dispenser Youtube Operation Link :