Home Companies Sichuan Aitong Wire & Cable, Inc.

FTTH FTTB 1M Fiber Optic Pigtail LC-SC Carrier Grade Single Mode

Contact Us

[China]

Trade Verify

Address: 51 Bohai Road, Jingyang District, Deyang City, Sichuan Province

Contact name:Vanessa Ma

Sichuan Aitong Wire & Cable, Inc.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

FTTH FTTB 1M Fiber Optic Pigtail LC-SC Carrier Grade Single Mode

Country/Region	china
City & Province	deyang sichuan
Categories	Radio & TV Broadcasting Equipment

Product Details

LC-SC Carrier Grade Single-Mode Single Core Pigtail 10M Extension Cable Fiber Optic Pigtail

▌Product description

LC SC SM Duplex fiber optic patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".

▌Feature

Low insertion and back reflection loss
Good interchangeability
Good durability
High temperature stability
Standard: Telcordia gr-326-core

▌Applications

Cable TV; Termination of active equipment; Telecommunication network; Subway; LAN; Data processing network; Test equipment; Premise installation; Wide area network; Optical fiber sensor

▌Knowledge

definition:

The optical fiber jumper shall not be excessively bent and circled, which will increase the attenuation of light during transmission.
The wavelength of optical fiber modules at both ends must be consistent. This means that both ends of the fiber optic module must be the same.
The outer sheath of the connector must be used to prevent dust and oil from damaging the optical fiber coupler.
Introduction to optical fiber jumper
Fiber optic patch cords are optical fibers that connect computers and equipment., The connection management is very convenient and the protective layer is thick. It is generally used for the connection between optical transceiver and junction box.

Structure:

The structure is similar to that of coaxial cable, and there is no mesh shielding.
The center is transparent glass core
Multimode fiber core diameter 15 μ m～50 μ m,
The core diameter of single-mode fiber is 8 μ m～10 μ m.
A glass shell with low refractive index is wrapped around the fiber core to keep the optical fiber in the fiber core
There is a thin plastic coat outside to protect the envelope.

▌Specification

Type	Standard,Master
Style	LC,SC,ST,FC.MU,DIN,D4,MPO, SC/APC,FC/APC,LC/APC.MU/APC
Fiber	Singlemode/Multimode 50/125, 62.5/125 (Multimode) OM2&OM1 50/125, 10G (Multimode) OM3
Cable	Simplex, Duplex Φ3.0mm, Φ2.0mm, Φ0.9mm PVC or LSZH
Polishing Manner	UPC,SPC,APC (8°& 6°)
Insertion Loss	≤ 0.1dB (For Singlemode Master) ≤ 0.25dB (For Singlemode Standard) ≤ 0.25dB (For Multimode) Tested by JDS RM 3750
Return Loss (Singlemode)	UPC ≥ 50dB SPC ≥ 55dB APC ≥ 60dB (typ.65dB) Tested by JDS RM3750
Repeatability	±0.1dB
Operating temperature	-400C to 850C
Geometry Requirement ( Singlemode)	Ferrule Endface Radius 7mm ≤ R ≤ 12mm (For APC) 10mm ≤ R ≤ 25mm (For Standard) Apex Offset ≤ 30 μm (For Master) Apex Offset ≤ 50 μm (For Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1

▌Product list

Boot

Connector

Fiber Type

Cable number

Ferrule

Connector

0.9mm

2.0mm

3.0mm

MTRJ

MPO

DIN

9/125um SM

50/125um MM

62.5/125um MM

OM3

OM4

Simplex

Duplex

Multi-fiber

Ribbon

APC

UPC

3M4M

.........

Customized

▌Fiber optic connectors summary

All standard connectors (SC, FC, LC, ST, SMA, E2000, MU) are available. Those connectors can be put on patchords, pigtails or components with single-mode (SM), multi-mode (MM), polarization maintaining (PM), polarized (PZ), Photonic-crystal (PCF), hollow-core (HC) or micro-structured fibers.

The company also realizes fiber optic connectors testing. IDIL fibres Optiques proposes specific and high quality customized solutions. Do not hesitate to contact the company.

A wide range of coating materials, with different dimensions (900 µm, 3 mm…) and cladding (stainless steel (SST), PVC, coated fiberglass…) is available. Optical fibers are supplied with special coating materials (aluminium, polyimide, gold,…) when they are intended to be used in a harsh or specific environment.

▌Scene


LAN	Monitoring equipment	Fiber to home

Communication products	Cable TV	Optical fiber Machine room allocation

▌Packaging & Shipping

1. Payment : L/C, T/T, Western Union, Moneygram,Paypal as well as Cash acceptable.

2. Delievery: Shipment is usually delivered within 1-5 working days after receiving payment.The goods is usually sent by express way(TNT,UPS,FEDEX,DHL,EMS or other special way) or by ship as per customers' exact quantity and requirement.

▌FAQ

Why we can choose you?

1): Reliable---we are the real company, we dedicate in win-win

2): Professional---we offer the products exactly you want

3): Factory---we have factory, so have reasonable price

How about the shipping cost?

If your goods is not large, we can send goods to you via counier, such as FEDEX, DHL,we cooperated with them for long time, so we have good price.If your goods is large, we will send to you via sea, we can quote the price to you, then you can choose whether use our forwarder or yours.

How about the price?Can you make it cheaper?

The price depends on the item your demand(quantity)

Beat quotation after receving full description of the item you want.

How about the sample time?What is the payment?

Sample time:3~10days after order & samples confirmed.

T/T,30% deposit, and balance is after the order is finished. Also we accept the PAYPAL, west union.