Active Member
|
[China]
Contact name:Fang
Shanghai Hengxiang Optical Electronic Co., Ltd. |
|
|
Z48 rotary encoder module incremental type external dimension 48mm 1024 pules for motor hole diameter 8mm
Signal Circuit of encoder
1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.
An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.
2. PNP output
The PNP output is an interface based on an output circuit with a PNP transistor.
3. Push-Pull output(HTL)
High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.
“Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.
4. TTL RS-422 output
In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.
The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.
Model Number to choose for Z48 Series
Z48-J1N50
Z48-J2C60
Z48-J3N100
Z48-J4C200
Z48-J6E256
Z48-J12C1000/4
Z48-J1N300
Z48-J1N2048
Z48-J2C2500
Z48-J3N50
Z48 Encoder Specification
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | bearingless encoder |
| External diameter | 48mm |
| Thickness | 22.5mm |
| Dimension of limiting slot | 30mm, depth 2.4mm |
| Installation dimension | R22.35mm |
| Hollow shaft type | through hole |
| Hollow shaft diameter | 8mm |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600;1000; |
| 1024;1200;2000;2048;2500; | |
| 1000/4;1000/6;1000/8;1024/4;1024/6；1024/8；2048/4；2048/6;2048/8；2500/4；2500/6；2500/8; | |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8-30V |
| Outlet type | Cable out from side |
| Output mode | NPN/(Open Collector Output) |
| line drive (26LS31) TTL | |
| line drive(DC8-30V) HTL | |
| Cable length | 500mm |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| Insulation strength | AC500V 60s |
| Insulation resistance | 10MΩ |
| GND | not connect to encoder |
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.
About Our Factory
