400G QSFPDD DR4 Optical Transceiver Module MPO12 Connector SMF 8x50Gb/S SFP

          This product is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP DD) optical module designed for 500m optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of parallel optical signals, each capable of 100Gb/s operation for an aggregate data rate of 400Gb/s. Reversely, on the receiver side, the module converts 4 channels of parallel optical signals of 100Gb/s each channel for an aggregate data rate of 400Gb/s into 8 channels of 50Gb/s (PAM4) electrical output data.

          An optical fiber cable with an MTP/MPO-12 connector can be plugged into the QSFP DD DR4 module receptacle. Proper alignment is ensured by the

guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an QSFP-DD MSA-compliant

QSFP-DD MSA compliant

4 parallel lanes

Compliant to IEEE 802.3bs Specification

IEEE 802.3bs 400GBASE-DR4 Specification Compliant

Up to 500m transmission on single mode fiber(SMF) with FEC

Operating case temperature: 0 to 70℃

8x53.125Gb/s electrical interface (400GAUI-8)

Data Rate 106.25Gbps (PAM4) per channel.

Maximum power consumption 12W

MPO-12 connector

RoHS Compliant