Home Companies Shenzhen Newbridge Communication Equipment Co.,Ltd

10G Bi - Di XFP Fiber Transceiver 10km Single Mode Wavelength 1310nm

Active Member

Contact Us

[China]

Address: 4A B Building Zhuao Industrial Park Gushu Xixiang Baoan District Shenzhen,China,518126

Contact name:Wendy Wan

Shenzhen Newbridge Communication Equipment Co.,Ltd

10G Bi - Di XFP Fiber Transceiver 10km Single Mode Wavelength 1310nm

Country/Region china
City & Province shenzhen guangdong

Product Details

10G Bi - Di XFP Fiber Transceiver 10km Single Mode Wavelength 1310nm
 

Product Features

●Supports 9.95 to 10.5Gb/s bit rates

●Duplex LC connector

●Hot pluggable SFP+ footprint

●850nm VCSEL transmitter, PIN photo-detector

●Up to 300m on 50/125um MMF(2000MHZ.KM)

●Low power consumption, < 1W

●Digital Diagnostic Monitor Interface

●Optical interface compliant to IEEE 802.3ae

●Electrical interface compliant to SFF-8431

●Operating case temperature:

Commerical:-20 to 75 °C

Industrial:-40 to 80 °C

 

Applications

●10G Base-SR/SW at 10.3125G

●10G Fiber Channel

●Other optical links

 

Product Descriptions

The Transceiver Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over Multi Mode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication and datacom.

Functional Diagram

 

 

Absolute Maximum Ratings

ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.54.0V 
Storage TemperatureTS-4085°C 
Relative HumidityRH085% 

 

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

 

General Operating Characteristics

ParameterSymbolMin.TypMax.UnitNote

Data Rate

 

 9.95310.312510.518Gb/s 
Supply VoltageVcc3.133.33.47V 
Supply CurrentIcc5 180280mA 
Operating Case Temp.Tc0 70°C 
TI-40 80 

 

 

 

Electrical Characteristics (TOP(C) = -20 to 75 , TOP(I) =-40 to 80 ,VCC = 3.13 to 3.47 V)

ParameterSymbolMin.TypMax.UnitNote
Transmitter
Differential data input swingVINPP180 700mVpp1
Transmit Disable VoltageVD2.0 Vcc+0.3V 
Transmit Enable VoltageVENVee Vee+0.8
Input differential impedanceRin 100 Ω 
Receiver
Differential data output swingVout,pp300 850mVpp2
Output rise time and fall timeTr, Tf282.0Vcc+0.3Ps3
LOS FaultVLOS_F20Vcc_HOSTV4
LOS NormalVLOS_NVee Vee+0.8V4

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

 

 

Optical Characteristics (TOP(C) = -20 to 75 , TOP(I) =-40 to 80 ,VCC = 3.13 to 3.47 V)

ParameterSymbolMin.TypMax.UnitNote
Transmitter
Operating Wavelengthλ840850860nm 
Ave. output power (Enabled)PAVE-5 -1dBm1
Side-Mode Suppression RatioSMSR30  dB 
Extinction RatioER45.5 dB 
RMS spectral widthΔλ  0.45nm 
Dispersion penaltyTDP  3.9dB 
Relative Intensity NoiseRIN  -128dB/Hz 
Output Optical EyeCompliant with IEEE 0802.3ae
Receiver
Operating Wavelength 840 860nm 
Receiver Sensitivity(ER=4)PSEN1  -10.9dBm2
Receiver Sensitivity(ER=5.5)PSEN2  -11.1dBm3
Average Receive PowerPAVE  +0.5dBm 
Receiver ReflectanceRrx  -12dB 
LOS AssertPa-30-23 dBm 
LOS De-assertPd  -14dBm 
LOS HysteresisPd-Pa0.5  dB 

 

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Valid between 840 and 860 nm. Measured with worst ER=4; BER<10-12; 231 – 1 PRBS.

3. Valid between 840 and 860 nm. Per IEEE 802.3ae

 

 

PinSymbolName/Description
1VEET [1]

Transmitter Ground

 

2Tx_FAULT [2]

Transmitter Fault

 

3Tx_DIS [3]

Transmitter Disable. Laser output disabled on high or open

 

4SDA [2]2-wire Serial Interface Data Line
5SCL [2]

2-wire Serial Interface Clock Line

 

6MOD_ABS [4]

Module Absent. Grounded within the module

 

7RS0 [5]Rate Select 0
8RX_LOS [2]Loss of Signal indication. Logic 0 indicates normal operation
9RS1 [5]

Rate Select 1

 

10VEER [1]

Receiver Ground

 

11VEER [1]

Receiver Ground

 

12RD-

Receiver Inverted DATA out. AC Coupled

 

13RD+

Receiver DATA out. AC Coupled

 

14VEER [1]

Receiver Ground

 

15VCCR

Receiver Power Supply

 

16VCCT

Transmitter Power Supply

 

17VEET [1]

Transmitter Ground

 

18TD+

Transmitter DATA in. AC Coupled

 

19TD-

Transmitter Inverted DATA in. AC Coupled

 

20VEET [1]

Transmitter Ground

 

 

Notes:

1.Module circuit ground is isolated from module chassis ground within the module.

2.should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.

3.Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.

4.Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot.

5. RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.

 

Digital Diagnostic Specifications

 

The transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

 

ParameterSymbolUnitsMin.Max.AccuracyNote
Transceiver temperatureDTemp-EºC-45+90±5ºC1,2
Transceiver supply voltageDVoltageV2.84.0±3% 
Transmitter bias currentDBiasmA0127±10%3
Transmitter output powerDTx-PowerdBm-2+3±2dB 
Receiver average input powerDRx-PowerdBm-20+1±2dB 

Notes:

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the las

 

 

 

Package Dimensions


 

Hot Products

3G-SDI Video Audio Coaxial Adapter 1080P SDI to HDMI Converter HD/SD/3G-SDI NEW 1. Overview ...
High quality HDMI to SD/HD/3G-SDI Converter Mini HDMI Converter Support SD-SDI/HD-SDI/3G-SDI ...
3G HD SDI Converter optical transceiver with Single Mode Single Fiber 1. Overview Newbridge®ND8010SG ...
Plug And Play 60km HD SDI Converter , SD Auto Detection Optical Transceiver 1. Overview Newbridge® ...
AC 220V CE FCC Certification HD SDI Optical Converter 1550nm Support 4 / 8 Channel Video 1. Overview ...
SD HD SDI Converter , 20km 40km 60km Optional Mini Converter with single mode or single fiber 1. ...