|
[China]
Trade Verify
Address: FLAT/RM B 5/F GAYLOAR COMMERCIAL BUILDING 114-118 LOCHART ROAD,HK, China
Contact name:Anna
HONGKING INDUSTRIAL CO., LIMITED |
|
Verified Suppliers
|
|
|
Fiber optic connector has a screw thread fitting into the adapter
to provide a secure connection. The connector is comprised of a
nickel plated brass body and a ceramic ferrule/spring/crimp barrel
assem bly plus a crimp-over sleeve and rubber boot.
Fiber optic connector, or optical fiber connector, is a component
to terminate the end of fiber optical cable, and enables quicker
connection and disconnection than fiber splicing. It mechanically
couples and aligns the fiber cores to make light pass successfully.
Therefore, fiber optic connector has an important impact on the
fiber optic transmission reliability and the performance of the
system. Quality optical connectors lose very little light due to
reflection or misalignment of the fibers.
These connectors are suitable for 900µm, 2mm and 3mm cable. The connector is precision made and manufactured to demanding specifications. The combination of a ceramic ferrule with precision nickel plated brass housing provides consistent,long-term mechanical and optical performance.
High size precision.
Good repeatability.
Good changeability.
Good temperature stabilization.
High wearable.
| Type | SM-UPC | SM-APC | MM-UPC | |||
| Typical | MAX | Typical | MAX | Typical | MAX | |
| Insertion loss | ≤0.1 | ≤0.3 | ≤0.15 | ≤0.3 | ≤0.05 | ≤0.3 |
| Return loss | ≥50dB | ≥60dB | ≥30dB | |||
| Ferrule hole sizes | 125.2-126.2um | 125-128um | ||||
| Durability | 500 mating cycles | |||||
| Working temperature | -40 to + 85ºC | |||||
