FSO600 HPI600 3105 Nm Cam Clutch Bearing

FSO600 HPI600 3150 Nm Cam Clutch Bearing

Features

Types FSO, FSO-GR, and HPI 300 to 700 are sprag type freewheels self-contained, sealed and bearing supported, using two ball bearings.
 Units are delivered oil or grease lubricated according to the type.

It is a  design with full sprag complement that gives a very high torque for a given diameter. Any overload is resisted by a sprag to sprag abutment, avoiding a sprag tilt over.

Lubrication 

Types FSO and HPI are oil lubricated and use standard shaft lip seals.

Type FSO-GR is grease lubricated and can be equipped with contact free labyrinth seals. 

Type HPI is specially designed for high speed indexing applications.

Dimensions and Capacities

NOTES

1) T max = 2 × T KN » Refer to Selection page 10 to 13
2) Inner race/outer raceg
3) Inner race/outer race labyrinth seal
4) Inch bore available on request
5) Only for oversize bore
Size 600 > 50 mm
Size 700 > 75 mm
*) 6 holes equally spaced at 60° plus 2 extra-holes at 180° » Refer to mounting and maintenance instructions

Mounting and Coupling

Pictures