Home Companies Changzhou Suma Precision Machinery Co., Ltd

BS110 Belt Conveyor Overrunning Clutch Bearing 250RPM

Changzhou Suma Precision Machinery Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Liudao Industrial Pak, Yaoguan Town, Wujin District, Changzhou city, Jiangsu Province, 213102

Contact name:Ellen Zhang

Inquir Now

Changzhou Suma Precision Machinery Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

BS110 Belt Conveyor Overrunning Clutch Bearing 250RPM

Country/Region china
City & Province changzhou jiangsu
Categories Rubber Belts
InquireNow

Product Details

            BS110 Belt Conveyor Overrunning Clutch Bearing 250RPM

 

Features

  The BS series Cam Clutches are intended for applications where reverse rotation of the slow speed conveyor head shaft is to be prevented (backstopping).

1. For prevention of rotation in the reverse direction at slow speeds on conveyors or pumps.
2. Before installation, verify that the direction of rotation of the inner race of the BS Cam Clutch (shown by the arrow on the inner

race) is the same as the direction of rotation of the conveyor.
3. Securely install the torque arm to the BS Cam Clutch using bolts of strength 10.9 or higher. Make sure that the contact between

the surface of the torque arm and the side of the outer race is level and free of dust.

Dimensions and Capacities

 



Model

Torque
Capacity
(Nm)
Max.
Overrunning
(r/min)
Inner Race

Drag
Torque
(Nm)


A


B


C


PCD
D


E


S

H-M
Size× Pitch
× No.of Tapped Holes


Weight

(kg)

BS302943500.58649064804513M 6 ×P1.0×42.1
BS507843000.9867125671107016M 8 ×P1.25×44.0
BS6515703403.9290160851409020M10 ×P1.5×611.5
BS7524503005.88901708515010020M10 ×P1.5×613.1
BS8558803007.8411521011018511530M12 ×P1.75×624.7
BS9578402509.811523011020013030M14 ×P2.0× 629.4
BS1101080025014.711527011022015030M16 ×P2.0× 634.2
BS1351570020019.613532013028018030M16 ×P2.0× 868
Type

Torque Capacity

(Nm)

Max. Overrunning

(r/min)

Inner race

Drag

Torque

(Nm)

ABC

PCD

D

ES

H-M

T.H.S.XP-Q'ty

G.F.H. (Size)

Q. of G.

(kg)

BS 16024,50010034.313536013031522040M20xP2.5-10PT 1/40.12
BS 20037,20010044.115043014538026540M22xP2.5- 8PT 1/40.14
BS 22049,0008073.523550023042029040M20xP2.5-16PT 1/40.8
BS 25088,2005093.129560029053033050M24xP3.0-16PT 1/41.1
BS 270123,000509829565029057537050M24xP3.0-16PT 1/41.2
BS300176,0005010829578029069047060M30xP3.5-16PT 1/41.3
BS335265,0005013730585032075049570M36xP4.0-16PT 1/41.4
BS350314,0005015732093036081553570M36xP4.0-16PT 1/41.5
BS425510,000502164401,03045094063570M36xP4.0-18Oil 6,000ml
BS450686,000502454501,09048099064580M42xP4.5-18Oil 7,000ml

 

 

 

Mounting and Coupling

 

4. Recommended shaft tolerance is h7 or h8.
5. When inserting the BS Cam Clutch on the shaft, apply pressure only on the inner race. Do not tap the inner race directly with a

hammer or exert any force upon the outer race, dust seal, or dust plate.
6. Always use a parallel key for installation onto the shaft and then fix the BS Cam Clutch to the shaft with the end plate. Never use

a tapered key.
7. When installing models above BS160 (grease lubricated types), place one of the four oil plugs in
The direct bottom location. This will allow for easy drainage of the grease for cleaning.
8. While the shaft is rotating, the end of the torque arm will swing to some extent in the direction of rotation. Support the torque arm

end only in the direction of rotation, but be sure to allow it a certain amount of free swing. If the torque arm end is fixed securely

(see installation diagram), the inside of the clutch becomes twisted, and this can result in damage to the components.
9. For models BS30 to BS200, a single torque arm on one side is sufficient, but for models 220 to BS450, use two torque arms, one

on each side. Install the torque arms evenly so the force is transmitted through the center of the clutch.
10. Torque arms for the BS Cam Clutch are standardized.

Pictures

 

Hot Products

DC5776A-N 16MM Thickness Sprag Type One Way Clutch Bearings Brief Introduction of DC Sprag Clutch ...
DC5476A 16MM Thickness One Way Sprag Type Overrunning Clutch Bearings Brief Introduction of DC Sprag ...
DC4972(4C) 13.5mm Thickness Sprag Overrunning Clutch One Way Bearings Brief Introduction Type DC is ...
DC2222G One Way Bearings Sprag Freewheel Clutch Backstop Brief Introduction Type DC is a sprag type ...
DC2776-N 13.5mm Thickness Sprag Freewheel Bearing One Way Overrunning Clutch Brief Introduction of ...
DC3034-N 13.5mm Thickness Sprag Type One Way Bearing Freewheel Overrunning Clutch Brief Introduction ...