Active Member
|
[China]
Address: 5th Floor, Building B,YingBo Industrial Park ,DongHuan Road,LongHua New Area,ShenZhen,China
Contact name:Zhang Lei
ShenZhen WanYi Technology Co., Ltd |
|
|
1. Using instructions:
(1) Please never touch induction part, or else, the failure caused
by touch on detection induction part is not included in
our guarantee scope.
(2) The anion generated from the nature is quite unstable and may
cause different measurement results due to temperature,
humidity, ultraviolet, electromagnetic wave, radioactive rays and
other factors of the testing fields.
(3) Please never place the tester in hot place or in the vehicle.
The abnormal high temperature may result in internal circuit
damage to cause incorrect testing.
(4) Please never test in water. The tester is not set with any
waterproof device. If it falls in water, please immediately pick it
up,
remove battery and keep it dried in air. After complete dryness is
confirmed, mount the battery in the tester for use. If there is
any abnormal phenomenon, please deliver the tester to the
manufacturer for repair in charge.
(5) The tester used or placed in strong electric field or in strong
magnetic field may result in failure so that this situation must
be avoided. The tester is not set with explosion-proof structure;
thus, please never use it in the field where combustible gas may
leak.
(6) If the test result is within 60, this value may be
environmental value. Please make more tests. Then if the test
result is still
within 60, this value can be regarded as environmental background
value.
2. Test principle of the product
IT-10 is based on the most advanced GM ray energy detection
technology and used to measure weak energy of radioactive rays
from natural ores, ceramics, tourmaline, etc. Via long-term data
experiment and accumulation, the energy of radioactive rays is
converted into anion quantity by up-to-date computer technology.
The extremely accurate measurement can be achieved by this
method.
3. Purpose of the product:
(1) Research and discuss for ore anions conducted by research and development institutions.
(2) Application and detection of advanced functional materials and solid anion materials.
(3) Research and development test and performance evaluation for anion health product.
(4) Such test for various powder anions as content detection and
evaluation for anions including natural ore, anion powder,
tourmaline and meteorite.
(5) Such test and evaluation for various solid anion products as
research and development and detection for anion bracelet,
anion cushion, energy cup, Khan steam room, bedrock bath and paint
coating, etc.
(6) Such test and evaluation for various liquid anion products as
research and development and detection for nano-silver, anion
mask and anion facial cleanser, etc.
(7) Other relevant emerging industries.
4. Innovation features of the product
(1) IT-10 adopts American most advanced GM tube ion detection technology and measures precisely.
(2) It adopts large screen LCD and measurement result is clear at a glance.
(3) It has storage function and it can store 28 data, which is convenient for the user to view, record and have contrast test.
(4) Unique sensor protection net and sliding protection cover can
prevent damages to the sensor due to improper use conducted
by the customer to the greatest degree and reduce the cost and
enhance test efficiency significantly.
(5) Various measurement modes can provide rapid and accurate measurement method for the user.
(6) It adopts universal 9V battery for power supply and it has
automatic shutdown functions, which are convenient for the user
to use and reduce energy consumption.
5. Technical indexes of the product
| Detector | High Performance GM Ion Detector |
| Measurement scope | 0-99990 pieces/cm3 |
| Measurement accuracy | <±15% |
| Measurement mode | Model 1, Rapid measurement mode The detector measures for 10 seconds and then displays measurement value on LCD. Model 2, Standard measurement mode The detector measures for 20 seconds and then displays measurement value on LCD. Model 3, Accurate measurement mode The detector measures for 20 seconds for 8 times and then displays
the average on LCD screen. It |
| Large screen LCD | It adopts 4 digits LCD to display. If 9999 is exceeded, X10 magnification will display. |
| Data storage | It can store 28 recent test data. Date stored automatically can be
viewed on the display and data which exceeds 28 shall be overlain circularly. |
| Automatic shutdown function | Automatic shutdown functions of 15 minutes without operation to reduce energy consumption |
| Power supply | An universal 9V dry battery |
| Dimension | 151X80X36mm |
| Weight | Approximately 0.35kg |
| Accessories | Portable sheath, Instructions and 9V battery |
| Service environment | -20°C-60°C, 5%-95%RH |
| Certification | CE (EMC1674) |
Product testing case
Textile testing
Negative ion board test pattern
Anion rubber mat test pattern
Negative oxygen ion detector ceramic tile
IT-10 anion Tester X10 magnification view mode
(IT-10 will change automatically the measring range when the
Measuring concentration is more than 10000,meanwhile
the display appears symbol of “X10", which means the displayed
value needs to be expanded tenfold,As following figure
shown the anion concentration is 32010ions
IT-10 ion tester store data view mode
