2.5mX31m autoclaved aerated concrete (aac) block,Automatic Concrete Autoclave

250,000 m3 AAC block plant overview

OLYMSPAN supplied 250,000 m3 Autoclaved Aerated Concrete Block Equipment

1 . The capacity required to configure 8 sets Φ2.68 × 31m AAC autoclave

2 . The capacity required to configure 1 units 8t / h steam boiler

250,000 m3 Autoclaved Aerated Concrete Block Processing

250,000 m3 AAC block plant Steps of production:

• The cake – still flat in the mould – is 90°tilted upright by WEHRHAHN's patented universal tilting 
machine.
• The cake rests on a separate cutting pallet.
• The upright cake is moved forward through the cutting line and is precisely cut as well as milled to the 
required dimensions.
• The cut and milled cake returns to the universal tilting machine and is tilted back flat onto the autoclave 
grid.
• The bottom cut is removed in fresh condition for immediate recycling.
• Autoclave grids with cakes are loaded on autoclave trolleys.
• Autoclaving as a flat cake (blocks stand upright) reduces sticking.
• Palletizing can easily be arranged with fork lift and turn grab. Automatic palletizing is an 
available option.
• Panel production is an available option.

250,000 m3 AAC block plant Pre-sales Service

Pre-contract, according to the actual situation, the company sent technicians to customers or communicate to design selection for the user to choose the most suitable equipment. Provided free of charge to the equipment and technology, process, layout, and other technical consulting and system design; provide all the drawings required for the design and data.

OLYMSPAN service ensures correct installation and commissioning for optimum performance by trained technicians. Correct installation is essential for optimum equipment performance. You will most likely not even notice that anything is amiss, but it could mean that equipments wear out prematurely or money simply slips through your fingers as wasted energy.

OLYMSPAN service ensures that this will not happen. During installation, 1-2 experienced engineering and technical personnel will be sent for the site representative for technical tests and installation instructions free of charge; processing the various problems arising in the course timely while installing.

OLYMSPAN offers a commissioning agreement that specifies each single service task to be performed and the products covered, thus showing our commitment to a correct installation process. During commissioning the equipment of our company, if necessary ,the operation engineers will be sent to be involved in commissioning or remote management, ensure that the equipments in good running condition.