ANHUI ELITE INDUSTRIAL CO.,LTD |
Water Based Dry Lamination adhesive Glue For PET/ BOPP/ MPET Film laminate To Paper
1, Brief introduction :
It is benzene/toluene free water based acrylic polymer emulsion
adhesive designed for dry bond /heat seal laminating process.
Dry bond lamination is the process of coating the adhesive to
plastic film, drying the adhesive with heat and air flow and then
laminating the adhesive to a second substrate(paper/paper board/cardboard etc..) via a heat compression nip.
It is mono-component adhesive with very good adhesion to flexible
film .
We offer different viscosity adhesive, to meet slow, middle and
high speed machine,
it can be used for manual, semi-auto, automatic and high speed full
automatic lamination machines.
2, Advantage:
1. Lower consumption than oil / solvent based lamination adhesives.
2. water based adhesive, free of toluene, eco-friendly.
3, Easy to clean the lamination equipment.
4, can be use for highest speed automatic dry lamination machine.
3, Production Line:
4, Specification Data sheet:
Type | Solid content | Features | Technical Parameter |
D1000 | 37%-42% | 1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination 3, Less glue consumption, reduce production cost 4, most suitable for common cartons of fruit, food etc...without embossing | 1, Appearance: white emulsion 2, Viscosity (MPA.S):100-1000 3, PH value: 6.0-8.0 4, Storage: 6 months 5, Toxicity: non toxic 6, Solid content: 37%-48% |
D2000 | 37%-42% | 1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination 3, Less glue consumption, reduce production cost 4, most suitable for PET film to paper ... without embossing | |
D3000 | 42%-47% | 1, Excellent powder cover ability, and composite fastness 2, High brightness and high speed lamination 3, very good effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc... 4, suitable for double side lamination, gold/silver card paper lamination. | |
D5000 | 37%-42% | 1, special use for high speed lamination process. 2, lower adhesive consumption, reduce production cost 3, suitable for high speed lamination machine, such as milk box, carton etc.. without embossing process. |
5, Application:
For lamination of plastic film like PET, BOPP, MPET to printed paper, silver /gold cardboard, paperboard, duplex board
etc...
6, Suggestion and Notice:
Suggestion:
1, Before lamination, raise the temperature of the laminating
machine roller to 95-110ºC, the temperature of the drying tunnel to
80-95ºC.
2, Pour the laminating adhesive into the glue tank, start the
roller to keep the adhesive disperse on roller evenly,
The amount of adhesive consumption shall be flexibly adjusted
according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature
of the roller shall be 80-95ºC, the roller pressure shall be around
6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no
adhesive overflow from both sides of film and connections.
Notice:
1, Clean the adhesive tank and roller before use our
adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona
over 38 Dyne ;
5, Better make testing for with film or paper, before
mass production, to check the color retention or bonding strength;
7, Packing:
(1), 25kgs or 50kgs/Plastic drum, 20000kgs/20'GP
(2) 200kgs/drum,16000kgs/20'GP
8, Our Company information
Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and
professional
suppliers of all kinds of Water Based Laminating Adhesive in the
world market.
Our Product were widely used laminate plastic film like PET, BOPP,
MPET to paper and exported to more than
30 countries, Such as Syria,
Laos,Vietnam,Indonesia,Saudi,Thailand,Cambodia,Malaysia,Philippines,India,
Africa etc.
Our Company Advantage:
1, Has a professional research center and dozens of R & D team
★More than 30 modern production bases
★ Profession R&D team, strong R&D ability
★ Advanced research equipment and strong comprehensive strength
have laid solid foundation for enterprise's development.
2, And colleges and universities to establish a long-term and
stable relations of cooperation
★The company has introduced the most cutting-edge scientific
research achievements
★At present, it has established long-term and stable cooperation
relations with Beijing University of Chemical Technology
★the company mainly engages in developing water-based
environmentally-friendly emulsion-polymerized products
3, Sales service network all over the country, Southeast Asia, to provide you with personal service
★The company has made remarkable achievements in polymer emulsion
materials in domestic market
★it is highly praised by clients.
★Meanwhile, the company is positively developing international
markets, and our products are exported to
Southeast Asia, European and American markets.
Our Mainly Product and Production Capacity as below:
Main Item | Capacity/Annual | ||
Water Based Cold laminating adhesive | 15000mts | ||
Water Based Dry laminating adhesive | 15000mts | ||
Water Based Laser Film laminating adhesive | 3000mts | ||
Water Based Sealing laminating adhesive | 3000mts | ||
Water Based protective film adhesive | 3000mts | ||
Water Based Gift Box adhesive | 3000mts |