Active Member
|
Address: ADD: 18F Tower C, Winning Ocean Plaza, No. 680 South Maanshan Rd, Hefei 230041, China
Contact name:Jack
ANHUI ELITE INDUSTRIAL CO.,LTD |
|
Paper Plastic Dry Lamination Adhesive Waterborne Acrylic Based D3003
Water based acrylic lamination adhesive
(Dry Lamination Glue / Heat seal lamination glue )
Application:
For lamination of plastic film like PET, BOPP, MPET to printed paper,
silver /gold cardboard, paperboard, duplex board etc..
| Type | Solid content | Features | Technical Parameter |
D1001 D1002 D1003 |
37-42% | 1, Good surface effect, good brightness and good composite fastness 2, apply for higher speed lamination 3, Less glue consumption, reduce production cost 4, most suitable for common cartons of fruit, food etc... without embossing---D1001/2/3 5, most suitable for PET film to paper ... without embossing---D-2001/2/3 | Components: Acrylate copolymer
1, Appearance: Milky white emulsion 2, Viscosity (MPA.S): 100-1000 3, PH value: 6.0-8.0 4, Storage: 6 months 5, Toxicity: non toxic
|
D2001 D2002 D2003 | 37-42% | ||
D3003 D3005 D3007 | 42-47% | 1, Excellent powder cover ability, and composite fastness 2, High brightness and high speed lamination 3, Super effect for processing after lamination, such as partial embossing, heavy embossing, heat embossing etc... 4, suitable for double side lamination, gold/silver card paper lamination. | |
D5001 D5002 D5003 | 37-42% | 1, special use for high speed lamination process. 2, lower adhesive consumption, reduce production cost 3, suitable for high speed lamination machine, such as milk box, carton etc.. without embossing process. |
Packing:
(1) 50kgs/Plastic drum, 20650kgs/1x20’GP without pallet. 13500kgs/1x20`GP with pallet.
(2) 200kgs/drum,16000kgs/1x20’GP, or 1000kgs/IBC, 20000kgs/1x20’GP
Suggestion:
1, Before lamination, raise the temperature of the laminating machine roller to 95-110℃,
the temperature of the drying tunnel to 80-95℃.
2, Pour the laminating adhesive into the glue tank, start the roller to keep the adhesive
disperse on roller evenly, The amount of adhesive consumption shall be flexibly adjusted
according to the paper or film need to be laminated.
3, After complete drying the adhesive on film, the real temperature of the roller shall be 80-95℃,
the roller pressure shall be around 6-20kgs.
4, the pressure roll shall be controlled flexibly to ensure no adhesive overflow from both sides of film
and connections.
Notice:
1, Clean the adhesive tank and roller before use our adhesive;
2, Do not mix our adhesive with other adhesives;
3, Our adhesive only apply for BOPP film with corona over 38 Dyne ;
4, Better make testing for with film or paper, before mass production,
to check the color retention or bonding strength;
