Advanced Instruments Co.,Ltd |
|
Introduction
Needle Flame Tester is designed according to
international standards IEC60695-2-2 and IEC60695-11-5.The
instrument applies for lighting, low-voltage electrical
equipment, household appliances, electrical machines, motors, power
tools, electronic equipment, electrical instruments, electrical
connectors, accessories and other electrical and electronic
equipment and parts, component research, production and quality
control departments and insulating materials , plastic or other
solid combustible materials industry to carry on small-flaming
ignition experiments.
Needle flame apparatus uses standard size (Φ0.9mm) needle
burner .and burns the sample with specific gas (butane) at the
angle of 45 °.It determines the ignition risk of the small-flame
caused by fault conditions in the equipment by testing the sample
burning situation,burningtime and burning length
Technical Parameters:
1 | Needle burner | It is made of stainless steel:the hole dia. 0.5mm ± 0.1mm, diameter≤0.9mm, length≥35mm |
2 | Burner flame angle | 0- 45 ° (arbitrary adjustment) |
3 | The combustion gases | 95% butane gas or propane gas |
4 | Subplate | white pine plank ( 10mm), Surface covered by standard silk paper 200mm ± 5mm below the flame |
5 | Temperature range | 0--1000 ºC |
6 | The flame temperature requirements | 100 ± 2 ºC ~ 700 ºC ± 3 ºC, Heating rise time: 23.5 ± 1.0s; |
7 | The flame height | 12mm ± 1mm |
8 | Ignition time | 0s ~ 999.9s adjustable, generally 30s |
9 | Burning time | 0s ~ 999.9s, automatic recording, manual pause |
10 | Test Space | ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements) |
11 | Temperature sensor | K-type insulation-sheathed thermocouple (Φ0.5mm) |
12 | Dimensions | L1120 * W520 * H1250mm |
13 | The diameter of exhaust | Φ100mm |
14 | Power supply | 220V / AC, 50Hz |