|
[China]
Trade Verify
Address: NO.212,Zhu ji rode,tian he distric,guangzhou,China
Contact name:Vivian
Guangzhou Opal Machinery Parts Operation Department |
|
Verified Suppliers
|
|
|
07000-13035 07000-13038 FOR KOMATSU O-Ring :
1). Color: NBR Black, brown/green
2). Hardness: 70-90 Shore A
3). size:standard size
4). Certificate: ISO9001
| Packing Type | Inner PE bag + outer carton box, (100~500) pieces/bag; (5~10) pieces/carton box or customized according to specific requirements from customer |
| Packing Material | Inner PE film + outer carton box, palletized for extra reinforcement if necessary |
| Shipping Marks | Neutral packing with printed marks. |
| Lead Time | Production lead time: 1~3 days after receiving of PO and advance payment (30%) |
| Delivery Time | 100% meet customer delivery requirement and can be expedited for special case |
| Freight | Sea (FCL & LCL) or air freight |
O RING PART NO.OF KOMATSU
| PART NO. | PART NO. | PART NO. | PART NO. |
| 07000-13035 | 07000-15200 | 07000-53032 | 11y-62-11980 |
| 07000-13038 | 07000-15210 | 07000-53035 | 144-14-54610 |
| 07000-13040 | 07000-15230 | 07000-53038 | 203-26-61360 |
| 07000-13042 | 07000-15270 | 07000-55190 | 20M-60-14170 |
| 07000-15070 | 07000-15280 | 07000-A5185 | 20Y-60-31240 |
| 07000-15080 | 07000-22018 | 07000-B1007 | 20Y-60-31250 |
| 07000-15105 | 07000-51008 | 07000-B1009 | 20Y-62-19560 |
| 07000-15130 | 07000-51009 | 07000-B2010 | 21T-09-11430 |
1. The O-ring is an annular seal having an O-shaped cross section,
the size of which is determined by the inner diameter ID and the
wire diameter CS.
2. O-ring size calculation: outer diameter = inner diameter + 2 x
wire diameter (OD = ID + 2x CS).
3. The purpose of using O-ring seals is to prevent leakage and loss
of liquids or gases.
4. O-rings are the most commonly used type of seal because of their
simplicity, convenience, and small installation space. As long as
the groove design and material selection are correct, and the
operating conditions are within the temperature range of the rubber
material, the seal can have a long-term sealing effect in the
static or dynamic seal.
Picture Preview:
FAQ
Q1: What’s delivery time?
A: Within 5-15 days after getting your desposit.
Q2: To which places have you exported?
A: North America, Europe, Middle East, Africa, Southeast Asia and
so on.
Q3: What’s your payment terms?
A: We usually accept all kinds of payment terms .Such as T/T,L/C,
etc.
Q4: Can I mix different power in one container?
A: Yes ,Different models can be mixed up in one container,even one
order.
Q5: Are you trading company or manufacturer?
A:We are trading company and we also have our own factory to
produce seals.With more than 20 years of PU manufacturing
experience.
Q6: Do you have a minimum order requirement?
A: Small trial order is acceptable.
Q7:What is your main products ?
A:We are specialized in the excavator spare parts, such as control valve ,hydraulic pump, center rotary , travel motor, swing motor, cylider, hydraulic break seal kit and other repair kits. If you need other excavator parts, we also can supply as your requirements.
Q8:What is your standard packing?
A: All the goods will be packed by carton box. Special packing method can be accepted when needed.
