Fully Enclosed Type Substation Field Use Vacuum Dielectric Oil
Purification Machine 6000 Liters/Hour
Old transformer oil solutions:
Used insulating oil, old transformer oil and aging insulation oil
is generally mixed with gas, water and particles, and other
contaminants. The content of the contaminants generally increases
with time. In the oil treatment by our oil purification plants,
these associated gases, water and contaminants are separated and
removed from the oil. In transformer applications, it is critical
that the transformer oil can not contain too much of these
substances. So our oil filtration equipment can solve this problem
to make the oil clean and reusable, then final oil treated by our
oil filtration system can be used into these electrical devices
again.
How to treat Transformer oil?
The series ZYD double-stage vacuum Transformer oil regeneration
plant is used in electric power department and industries to deal
with various oils such as transformer oil, mutual oil, switch oil
and so on.
1, Remove water from transformer oil, such as free water, trace
water and so on by the double stage vacuum system. And this oil
filter can eliminate water content from oil completely.
2, Remove gas, air content from the old transformer oil by vacuum
degassing system.
3. Remove impurities, tiny particles, acidity, sludge, free carbon,
other soluble oil decay products and discoloration substances by 3
filters (Primary filter, secondary filter, fine filter).
4. Independent vacuum oiling system for transformers, this oil
purifier can also vacuum dry transformer and on-line operation with
transformers.
5. It is mainly used for purifying the insulating oil, transformer
oil, mutual oil, switch oil, dielectric oil and so on. The standard
ZYD oil filtration system is designed for processing oils in
workshops, in storage tanks or directly in transformers (energized
or de-energized transformers).
oil filtration, oil processing, oil filter, oil purifier, oil
recycling, oil treatment, oil regeneration, oil restoration, oil
filtering, waste oil disposal, oil reclaiming, waste oil
management, energy saving, oil reconditioned, oil reconstituted,
oil restituting, oil recovering, oil water separator, oil
purification, oil reclamation, oil dehydration, oil demulsifier,
oil flushing, oil flush, degasification
Technical Parameters:
Parameters | Unit | ZYD-30 | ZYD-50 | ZYD-100 | ZYD-150 | ZYD-200 | ZYD-250 | ZYD-300 |
Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 |
Working Vacuum | Mpa | -0.08 ~-0.099 |
Working Pressure | Mpa | ≤ 0.3 |
Temp Range | ℃ | 20 ~80 |
Power Supply | | 380V, 50Hz, 3Phase( As per required) |
Working Noise | Db | 60 - 80 (Depended on the configuation) |
Heating Power | KW | 30 | 60 | 90 | 135 | 150 | 165 | 180 |
Total Power | KW | 35 | 67.5 | 101.5 | 149 | 164 | | 198 |
Inlet/Outlet Diam | MM | 25 | 32 | 42 | 50 | 50 | 60 | 60 |
Weight | KG | 450 | 550 | 750 | 950 | 1200 | 1850 | 2000 |
Size | Length | MM | 1450 | 1450 | 1750 | 1850 | 1950 | 2050 | 2150 |
Width | MM | 950 | 1000 | 1250 | 1300 | 1350 | 1400 | 1450 |
Height | MM | 1700 | 1750 | 1950 | 2000 | 2050 | 2100 | 2150 |
AFTER TREATMENT |
Dielectric Strength | KV | ≥ 75-85 |
Water Content | PPM | ≤ 3 |
Gas Content | % | ≤ 0.1 |
Particle Size | μ | ≤ 3 |
Cleanliness ≤NAS 1638 Grade 5 |
Application:
The ZYD transformer oil purifier can remove the water, gas and
impurities in insulation oil high-efficiently, increasing the
pressure force and quality of oil, make sure the electric device
running safely. The machine is mainly used for electric power
department and industries to deal with various oils such as
transformer oil, mutual oil, switch oil and so on. The machine is
especially for purifying the insulation oil in all kinds of large
power equipments that are above 110KV, especially for the altitude
is over 500 meters.
Feature:
1. High vacuum limiting vacuum less than 5pa, working vacuum less
than 35pa.
2. High absorption speed, absorption speed power more than 333L/Sr.
3. Duplex 3D stereo-evaporation technology, eliminating the liquid
water very effectively.
4. UK G technology by which the trace water that is show chain,
such
as dissolved water, can be removed effectively.
5. Distinctive removing impurities technology filtering through
double FH trapezoidal network and absorbing by high polymer without
the mechanical power.
6.Especially applied to vacuum oiling and drying for power
transmission equipments that are over 110kv.
7.Can be operated both on-load and off load.
8. Carbon fiber infrared heating system that can make the oil
contains zero sum of ethyne after treatment.
9.can be used to dry the electric equipment and input the oil into
the electric equipment under the vacuum state.
10.The machine adopts the double-infrared liquid automatic
controller, sensitive automatic pressure protector and the high
effective equipment for degas, so it is easy to operate.
Advantage:
Comparing with the single-stage vacuum oil purifier, this machine
dewater, degas and removes the impurities more quickly, more
completely, and makes the oils limiting voltage-withstand value
much higher. As the bridge-type vacuum linking system that can
purify and also can be an independent vacuum power supply, this
machine can treat the electric insulation devices.