Dongying Oilman Machinery Equipment Co.,Ltd. |
Verified Suppliers
|
Rock Drilling Tool PDC Diamond Core Drill Bit For Oil Drilling
Description of PDC Drill Bits:
PDC drill bit is a kind of full face drilling bit. It is mainly used for coal mining, oilfield, water conservancy and hydropower, construction of road and building. We has been in drilling field for decades, and we can offer PDC bit with various sizes and specifications.
Technical Parameter
Features
1. According to the characteristics of different formation, the crown profile is optimized, and the composite pieces with different functions are optimized to meet the drilling needs of different soft to medium hard formation.
2. The cutting structure adopts force balance design, asymmetric blade, deep chip groove design, etc. The drill has a higher rotary speed.
3. High quality steel is used as the base material of the drill bit, and high performance wear-resistant material is surfacing on the blade surface to prevent erosion of basic materials.
4. The dynamic flow field simulation technology is adopted to optimize the hydraulic design of the bit, enhance the cleaning and cooling effect of the bit, and prevent the bit from balling.
PDC bit use precautions
1. Before the drill bit is down, it is necessary to confirm that the bottom of the well is clean, no sand, no metal falling.
2. Check if the thread connection thread of the PDC is intact and the nozzle installation is intact.
3. Before drilling, you should avoid the pressure too much and prevent the bit from falling.
4. The last single root should have a large displacement starter turntable, and draw the eye to the bottom of the well. Fully wash the well to prevent the cuttings from clogging the nozzle. It should be gently pressed and slowly contacted to smoothly contact the bottom of the well, with small drilling pressure, low rotation speed, large displacement and small torque operation.
5. The bottom hole shape is 40-60RPM, and at least 30 minutes.
6. Refer to the recommended parameters of the drill manual, and determine the drilling pressure and speed in combination with the actual conditions of the formation.
7. The operation should be smooth during the drilling process, and the drill should be evenly distributed.
8. If it is found that the drill bit does not have a footage, the pump pressure is obviously increased or decreased, the connection speed is suddenly decreased, and the torque is increased.
PDC Bits Display:
Application:
FAQ:
How can I place order?
A: You can contact us by email about your order details, or place order on line.
How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T , L/C,
Western Union are the most usual ways we are using. If you want to
use other way, please tell me, we can discuss.
What’s the order procedure?
A: First we discuss order details, production details by email,
Whats app or Wechat. Then we issue you an PI for your confirmation.
You will be requested to do pr-epaid full payment or deposit before
we go into production. After we get the deposit, we start to
process the order. We usually need 7-15 days if we don’t have the
items in stock. Before production has been finished, we will
contact you for shipment details, and the balance payment. After
payment has been settled, we start to prepare the shipment for you.
What’s the warranty period?
A: Warranty for one year after delivery except wearing parts.
How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually
credit to our customer or replace in next shipment.