Insulating Oil Dielectric Strength Tester Kit, Transfomer Oil Tester Machine,BDV Meter

Application:
HJT  series fully automatic oil tester is apply to test the insulating oil's dielectric strength, which is designed as per the requirement of IEC165 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety.

  Technology and parameter data 
1.  Power supply:  AC220V ±10%, 50 HZ 
2.  Output voltage:  60 kV, 80 kV, 100 kV (100 kV should be specially designed) 
3.  Capacity:  1.2 kVA (for 60kV), 1.6 kVA (for 80 kV), 2.0 kVA (for 100 kV) 
4.  Pressure increase speed:  about 2 kV/S 
5.  Voltage inspection accuracy:   3% 
6.  Dielectric strength sensitivity:  <2KV 
7.  Wave from distortion:   UUUUUU<UUUUUU 3% 
8.  Breakdown response time:   UUUUUU<UUUUUU10ms 
9.  Polar distance:   2. 5mm 
10. Working environment:  temperature: 0 to 40 º C, humidity: UUUUUU<UUUUUU 85% (Relative Humidity) 
11. Storage environment:  temperature: -20 to 60 º C, humidity: UUUUUU<UUUUUU 75% (Relative Humidity)
12. Working Altitude:  < 1500 meters. (If over 1500m, it can be customized)
13. Dimensions and weight:  38 x 37 x 38 cm. Net: 40 kg (Approximately)

Tel: +86 23 62538144

Fax:+ 86 23 62538144-3

Website: www.hopufiltration.com

Branch 1: www.oilfiltration123.com

Branch 2: www.oilpurifiertech.com