Lexia 3 pp2000 Automobile OBD2 Diagnostic Tool for Citroen and
The following diagnostic functions are supported:
Displays complete identification of control unit, e.g. part number,
software/hardware version, manufacturer, etc...
Read fault codes
Displays all stored and pending fault codes with complete
description (e.g. “Rail pressure - too low pressure”).
Program supports report printing or copy to clipboard.
Clear fault codes
This function clears all stored fault codes and other diagnostic
Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and
reads all diagnostic fault codes.
Program displays live Data like Engine Speed, Battery voltage,
Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in
graph, 9 values at once, or full listing (all measured values).
Logging to file is also supported, which allows offline analysis.
Actuator test activates particular actuator (e.g. turn on fuel
pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc…)
This feature is of great importance in all vehicles because systems
like Engine control units, Immobilizers, Airbags, Alarms, Body
Control Units, and some others, require you to perform reset or
programming procedures after car repair is done, or even
configuration after replacing broken Control Unit.
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128
MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended)
and Microsoft Windows 98 SR2/2000/XP with the latest service pack
If customer requires, we can prepare ready to work PC.
PPO Software supported language: English, Chinese, German, French, Japanese, Russian, Arabia,
Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary,
Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish,
Slovenian, Swedish, Czech, Croatia, Thai.
Lexia Software supported language: English, German, French, Japanese, Russian, Spanish, Portuguese,
Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.
lexia 3 Description:
lexia 3 pp2000 now has the latest software diagbox software, you
can diagnostic Citroen and Peugeot cars in one software.we provide
the best qulity lexia 3, you can check the compare inside photo
Lexia 3 Description:
Dealer’s diagnostic scanner for comprehensive diagnosis for Citroen
and Peugeot cars. You can do all as an authorized Dealer does. This
diagnostics software allows you to perform complete diagnostics of
all from 1995 till present models. Diagnostics is performed via OBD
II connector (which is located near steering wheel) or via
manufacturer-specific connector (only older cars, pre-2001).
Unlike other universal car scanner tools which only read fault
codes, this software performs nearly ALL the functions like the
original dealer diagnostic tool. Our diagnostic interface contains
K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM
• Main unit (1 pc)
• Diagnostic cable (1 pcs)
• USB cable(1 pcs)
• Power cable clips( 1 pair)
• Latest version Software CDs diagbox (1 pcs)
now you can install one software and to test the lexia and pps,
check the photo :
why you will select our tools ?
we dont sell the cheapest and low qulity lexia 3. so you take the
normal price and get the good qulity tool.our lexia 3 can update. i
list our lexia 3 mainboard with the original and other cheaper and
low qulity .you will see our lexia 3 all is the same as original
functin, work good, less 1% our lexia 3 will send it back for repair. for the cheaper lexia 3
less over 20 spareparts , it cannot work for every same function as original , and all Citroen&Peugeot unite system , can not update.
choose the best qulity is the best important for you