Active Member
|
[China]
Address: A2 Building,TangWei Fuyuan Industry Zone，Fuyong Town,Baoan District，Shenzhen,China
Contact name:Daisy Xu
Shenzhen Normand Electronic Co.,Ltd |
|
|
Physical parameters:
Working temperature :-30-85degree
Working voltage:DC5V / DC7.5-24V
Working power:2W
Weight:0.3kg
Size:L165mm×W80mm×H30mm
Signal port:3pin connect port
T-1000S System features
1.32-65536 Gray,Support software Gamma correction.
2.Support point, line, surface, rules and special-shaped handle.
3.Single-port output,can support 2048 pixels.
4.Multiple controllers can be cascaded together and work synchronous,
play back content stored in the SD card.
5.Compatible with single line or double line chips.
NOTE:
1.T-1000S port 512 lights, the playback speed of up to 30 frames / sec, the port more than 512 lights,
the frame rate with the increase in the number of lights automatically reduced.
2. Display files naming: when placing one file, copy the software generated display file to the formatted SD card, when placing multiple files should be named as “00led”,”01led”,”02led”…(00means the first display file, 01means the second, and so on)
Suport IC :
| Chip type | Software code& Controller type | Lamps/(MAX) | Note |
| LPD6803,D705,1101,6909, 6912 | T-1000-6803 | 2048 pixels | |
| LPD8806,LPD8809 | T-1000-8806 | 2048 pixels | |
| TM1803,TM1804,TM1809,TM1812 | T-1000-TM | 2048 pixels | TM1804 and TM1809 are divided into high and low |
| TM1903,TM1904,TM1909,TM1912 | T-1000-TM19 | 2048 pixels | |
| UCS6909,UCS6912,UCS7009,UCS5903 | T-1000-UCS-32 | 2048 pixels | |
| UCS1903,UCS1909,UCS1912 | T-1000-UCS-256 | 2048 pixels | 1903 and 1909 are divided into high and low |
| UCS3903 | T-1000-UCS-1024 | 2048 pixels | |
| DMX512 | T-1000-DMX | 170/512 pixels | Compatible with standard DMX512 |
| WS2801,WS2803 | T-1000-WS | 2048 pixels | |
| WS2811 | T-1000-WS2811 | 2048 pixels | WS2811 be divided into high and low |
| DS189 | T-1000-DS189 | 2048 pixels |
Definition of buttons
Features:
1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents
Note: The model T-1000S with one port output, When it control 512
pixels the speed can reach 30fps, more than 512 pixels, the frame
speed will be slow down automatically
Connection diagram:
Regulatory function button:
Specific parameters:
Memory Card:
. Type: SD Card
. Capacity: 128MB-2GB
. File Format: FAT file format
. Store files: *.led
Physical parameters:
. Weight:0.2kg
. Size:122mm*67mm*25mm
. Temperature :-40-85 Degree
. Volgate: DC5V / DC7.5-24V
. Power:3W
Note:
To copy files to SD card, you must first format to the SD card, pay
attention to is that each copy must be formatted before.
SD card must be formatted as "FAT" format.
NOTE:For the TTL(SPI) signal, the controller signal ground must connect to
the LED lamp ground directly.
