|
[China]
Trade Verify
Address: Luoyang National University Science and Technology Park
Contact name:sabrina.chen
Luoyang Hypersolid Metal Tech Co., Ltd |
|
Verified Suppliers
|
|
|
1mm-10mm Molybdenum Bar Black/Alkaline/Polished Surface
Application
X-ray targets. molybdenum is the most used target material in x-ray
generation. Molybdenum has a high atomic number which increases the
intensity of the x-rays at a set of voltage and current. Its high
melting point also allows the x-ray anode to become white hot.
Radiation shield. molybdenum alloy combines the advantages of high
density, high radiation absorption, high melting point and good
corrosion resistance, is an ideal material to shield from various
radiations.
Armor penetrator. The weapon uses the kinetic energy of a
projectile to destroy enemy targets. This energy is a function of
the mass and its velocity when reaching the target (terminal
velocity). The mass is dependent on the density, and the terminal
velocity is dependent on both the density and melting temperature.
molybdenum has both advantages.
Specification
Diameter | 0.125 (3.18 mm) 6 (152 mm) |
LengthVarious lengths are available | |
Purity | Mo≥99.95% |
Material | Pure Molybdenum, Molybdenum TZM, Mo- La alloy |
Standard | ASTM B-387 |
Properties
*If the diameter is <0.125”, please check our Molybdenum wire.
Molybdenum rod and molybdenum bar are formed by sintering molybdenum powder. Molybdenum rod has a high melting point, good thermal conductivity, and low thermal expansion performance. It can be used to manufacture electric vacuum devices and electric light source parts, and can also be used as high-temperature heating elements, high-temperature structural parts, electrodes, etc.
Please view the molybdenum rod to see our standard sizes of round bars. The above are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of the molybdenum bar that you require, please feel free to contact us.
Molybdenum Rod Surface
Cleaned: The surface is chemically cleaned to remove all lubricants and oxides.
Black: The surface is either as swaged or as drawn and retains a coating of processing lubricants and oxides.
Chemical composition
Grade | Molybdenum(Mo) (%) | The impurity content is not more than (%) | |||||||
Fe | Ni | Al | Si | Mg | C | N | O | ||
Mo-1 | 99.95 | 0.01 | 0.005 | 0.002 | 0.01 | 0.005 | 0.01 | 0.003 | 0.008 |
Atomic number | 42 |
CAS number | 7439-98-7 |
Atomic mass | 95.94 [g/mol] |
Melting point | 2620 °C |
Boiling point | 4639 °C |
Density at 20 °C | 10.22 [g/cm] |
Crystal structure | Body-centered cubic |
Coefficient of linear thermal expansion at 20 °C | 5.210-6[m/(mK)] |
Thermal conductivity at 20 °C | 142 [W/(mK)] |
Specific heat at 20 °C | 0.25 [J/(gK)] |
Electrical conductivity at 20 °C | 17.9106[S/m] |
Specific electrical resistance at 20 °C | 0.056 [(mm2)/m] |
