Luoyang Hypersolid Metal Tech Co., Ltd |
Verified Suppliers
|
|
Non-Ferrous Molybdenum Rod Corrosion-Resistant
Molybdenum Rod Application
Lighting. molybdenum has been used extensively as the filament in
traditional incandescent light bulbs. Due to low energy
efficiency, high heat generation, and short service life, these
light bulbs have been gradually replaced by fluorescent and lately
by LED lights.
Furnace parts and High-temperature alloys. Due to high melting
points and high strength, molybdenum and its alloys are used in
many high-temperature applications, such as arc-welding electrodes,
heating elements and shields in high-temperature vacuum furnaces,
and turbine blades in generators and aircraft engines.
X-ray targets. molybdenum is the most used target material in x-ray
generation. Molybdenum has a high atomic number which increases the
intensity of the x-rays at a set of voltage and current. Its high
melting point also allows the x-ray anode to become white hot.
Specification of Molybdenum Rod
Diameter | 0.125 (3.18 mm) 6 (152 mm) |
LengthVarious lengths are available | |
Purity | Mo≥99.95% |
Material | Pure Molybdenum, Molybdenum TZM, Mo- La alloy |
Standard | ASTM B-387 |
Properties of Molybdenum Rod
*If the diameter is <0.125”, please check our Molybdenum wire.
Molybdenum rod and molybdenum bar are formed by sintering molybdenum powder. Molybdenum rod has a high melting point, good thermal conductivity, and low thermal expansion performance. It can be used to manufacture electric vacuum devices and electric light source parts, and can also be used as high-temperature heating elements, high-temperature structural parts, electrodes, etc.
Please view the molybdenum rod to see our standard sizes of round bars. The above are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of the molybdenum bar that you require, please feel free to contact us.
Molybdenum Rod Surface
Cleaned: The surface is chemically cleaned to remove all lubricants and oxides.
Black: The surface is either as swaged or as drawn and retains a coating of processing lubricants and oxides.
Chemical composition
Grade | Molybdenum(Mo) (%) | The impurity content is not more than (%) | |||||||
Fe | Ni | Al | Si | Mg | C | N | O | ||
Mo-1 | 99.95 | 0.01 | 0.005 | 0.002 | 0.01 | 0.005 | 0.01 | 0.003 | 0.008 |
Atomic number | 42 |
CAS number | 7439-98-7 |
Atomic mass | 95.94 [g/mol] |
Melting point | 2620 °C |
Boiling point | 4639 °C |
Density at 20 °C | 10.22 [g/cm] |
Crystal structure | Body-centered cubic |
Coefficient of linear thermal expansion at 20 °C | 5.210-6[m/(mK)] |
Thermal conductivity at 20 °C | 142 [W/(mK)] |
Specific heat at 20 °C | 0.25 [J/(gK)] |
Electrical conductivity at 20 °C | 17.9106[S/m] |
Specific electrical resistance at 20 °C | 0.056 [(mm2)/m] |