Active Member
|
[China]
Address: ROOM 1203, BLOCK A, NO.58 LIANGQING ROAD, WUXI, CHINA
Contact name:Jina Wang
Nodha Industrial Technology Wuxi Co., Ltd |
|
|
PIPE BEVELING MACHINE
The ID-Mounted beveling operation use an expandable mandrel which is insert into the open end of the pipe. Tighten
draw nut extend the expanding blocks and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the pipe from the end, a bevel is finished which conforms to the bevel angle required. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.
Features
Application
Specification
Selection Guide
| Model | Clamping Range (ID) | Working Range (OD) | Wall Thickness | ||
| mm | inch | mm | mm | ||
| 80 | 28-76 | 3 | 88.9 | ≤15 | |
| 120 | 40-110 | 4 | 114.3 | ≤15 | |
| 252 | 80-240 | 10 | 273.05 | ≤20 | |
Typical Buttwelding Joint
Standard Supply
Working On Site
Exhibition
After-Sale Service
1. Warranty period: 12 months
2. Emergency spare parts required dispatched within 24 hours
