Shaanxi Nick Machiney Equipment Co.,Ltd |
|
How to maintenance the hydraulic baler
Good equipment is maintained, and bad equipment is caused by your
carelessness. The machines in the market are really dazzling. It is
impossible to distinguish between the good and the bad. It can only
be done in a test machine. see,
But the new machine is generally invisible. When you buy the waste
paper box baler, after a long time of use and washing, you can
discover the mystery. Good equipment is presented to everyone by
maintenance. The bad machine is the problem caused by you not
taking care of it properly.
Before opening the waste paper box baler, check the machine
bearings, hydraulic cylinders, fuel tanks, and conveyor belts for
any garbage left over from yesterday's work, and then check if
there is any open space around, so that you will not be rushed
during the Baler. To vacate the ground to find a place for the
compressed material block, let's see if there are any matters
needing attention before starting the machine, check whether the
parts of the strapping machine are in good condition, and look at
the screws and nuts of each part If there are signs of loosening,
and then there is such a situation, please ask the master to fasten
it quickly. If there is a shortage of nails and caps, they can be
filled in time. This equipment will not only make your profits
return, but also will make your factory more profitable.
NKBALER recommends that you do a good job of daily maintenance and
maintenance of the hydraulic baler, which can effectively extend
the service life of the hydraulic baler and create greater profits
for you.
Usage
Specialized in recycling and compressing the loose materials like plastic film, PET bottles, plastic pallets waste paper, cartons, cardboards trims/scraps, etc.
Machine Features
● Heavy duty close-gate design for more tighter bales
● Hydraulic locked gate ensures more convenient operation
● It can feed material by conveyor or air-blower or manual.
● PLC control system, It Can automatically inspection feed, it can
press to front end each time and available for manual bunch
one-time automatic push bale out and so on process.
● Unique double-cutting design of cutters improves the cutting
efficiency and lengthens the lifespan of the cutters
● Particular anti-slide design of the machine makes nicer bales
● Unique trunnion-mounted frame and ball-end joint design for the
main cylinder avoid the torque on the rod, which lengthens the
lifespan of the seals
Model | NKW60B |
Hydraulic power | 60Ton |
Cylinder size | Ø180 |
Packaging size(W*H*L) | 1100*1000*700mm |
Feed opening size(L*W) | 1200*1000mm |
Bale line | 4 Line /Manual strapping |
Out-bale way | Push bag |
Bale Density (OCC) | 350-450kgs/m3 |
Bale weight | 350-500Kg/bale |
Voltage(can be customized) | 380V/50Hz |
Power | 18.5KW/25HP |
Machine size(L*W*H) | 4450*1100*2180mm |
Feeding Device | cyclone / conveyor |