|
[China]
Trade Verify
Address: NO.2030 ZHENCHENG ROAD JIANGYIN CITY JIANGSU PROVINCE CHINA
Contact name:Vera
Jiangsu Tongyue Gas System Co.,Ltd |
|
Verified Suppliers
|
|
|
Application in oil-gas territory:
Now, nitrogen gas has been used widely in gas drilling of the oil-gas well, three times oil production operations, well completion, well repair, pressure upkeep and gas storage. And the inertia of nitrogen and the high pressured nitrogen can be in collecting gas and the sweep of piping system to prevent inflammable gas burning and the underground pipes of oil field being corroded.
GAS Drilling
Improve the Penetration Rate
Reduce or Avoid Leakage
Extend the Service Life of Drill
Decrease the Complex Hole Problems
Reduce Completions and Stimulations
Protect and Found Producing Formulation
Three drilling operation
Keep the Well Pressure
Injecting into Oil Well with Carbureted Hydrogen,Nitrogen Oil-driving
Holder-on Work, Improve the Productivity of Oil and Gas
Air-lift Operation, Avoid Drilling Trouble
Thermal Extraction to Increase Recovery Efficiency
The Heat Insulation Effect of Wellbore When Steam Huff and Puff
Control the Mud Density
Clean Oil Well
The Ideal Vector of Surfactant
Increase the Service Life of the Well
Characteristics:
| Number | Name | Specification and Type | Manufacture | Quantity | Main Technological Indexes |
| Air Compressor Pry | |||||
| Screw air Compressor | G355 | Atlas-Copco | 1 Set | Rated Air Capacity:≥57Nm3/min Rated Pressure:0.8MPa Oil Content in Air:≤3ppm Air Temperature:≤Ambient Temperature +70-80℃ Cooling Method:Air Cooling Power Rating:355KW Driving Mode: External Dimension: 4174*2120*2500mm | |
| Air Storage Tank | CG1/8 | TRUE GAS | 1 Set | Rated Pressure:0.8Mpa Volume: 1m3 Material:Carbon Steel | |
| Air Handling | |||||
Three Level Filters
| CF006 TF006 AF006 |
Italy ATS |
3 pieces | Rated Pressure:1.0Mpa Connection Mode:DN25 Rated Handling Flow:25 Nm3/min Air Quality After Filtration: Particulate≤0.01μm oil≤0.003ppm Filter Pressure Drop:≤0.2bar Filter of all levels of the configuration system shall be configured with timed electronic discharge valve and manual draining valve. | |
| Refrigeration Dryer | HF-25 | TRUE GAS | 1Set | Rated Pressure:0.6-1.0MPa Rated Handling Flow:25Nm³/min Pressure Loss in the System:≤0.2bar Rated Inlet Air Temperature:≤50℃ Outlet Air Dew Point Temperature :3℃ Power Rating:4.5KW | |
Connecting Pipeline and Valve | / | TRUE GAS | 1 Set | Structure:Seamless Steel Tubes for Liquid Service Material:Carbon Steel of High Quality | |
| skid-mounted nitrogen generator | |||||
| Molecular Sieve | 3KT-172 | Japan | 1 Batch | Nitrogen Purity:≥99.9％ Capacity:300Nm³/h Design Inlet Pressure:0.7Mpa Design Operating Temperature:45℃ Maximum Operating Temperature:65℃ | |
| Absorption Tower | XF-300 | TRUE GAS | 1 Set | Working Pressure:0.7Mpa Material:Q235B Design Pressure:0.8Mpa | |
| PLC | S7-200 | Siemens | 1 Set | Control Mode:PLC Control Operating Voltage:24VDC Output Form:Relay Output All Components are Imported, Assembled to a Full Set Domestically | |
| Pneumatic Valve | DN65 DN40 | SKF | 10 Pieces 6pieces | Start Mode:Pneumatic Control Mode:Solenoid Valve Material: Stainless 304 | |
| Solenoid Valve | 3v-210 | Taiwan AirTac | 8 Pieces | ||
| Nitrogen Gas Analyzer | P860-5N | Chang Ai | 1Piece | Measuring Range:78％~99.99％ Principle of Sensors: Ion Beam; Nitrogen Sensor Measuring Mode: Gas Inlet | |
| Nitrogen Buffer Tank | CG1/8 | TRUE GAS | 2 Piece | Rated Pressure: 0.8Mpa Design Pressure: 0.84Mpa Volume: 1 m3 Material: Carbon Steel | |
| Flow Meter | LZB-25 |
Changzhou Shuanghuan | 3Piece | Rated pressure:1.0Mpa Diameter:DN40 | |
| Craft Manifold,Valve | / | TRUE GAS | 1 Set | Structure:Seamless Steel Tubes for Liquid Service Material:Carbon Steel of High Quality | |
| Skid-mounted | / | TRUE GAS | 1Set | Structure: Steel Structure Base Material:Low-Carbon Steel | |
| Nitrogen Storage Tank | CG5/8 | TRUE GAS | 1Piece | Rated Pressure:0.8Mpa Design Pressure:0.84Mpa Volume: 5m³ Material: Carbon Steel | |
| Container | 20 feet | TRUE GAS | 3 sets | Material: Carbon steel | |
| Other Auxiliaries | |||||
| Finished Documents | / | TRUE GAS | 1 Set | Complete Set of Equipment Data | |
| Accessories | / | TRUE GAS | 1 Set | Original Supporting Equipment Accessories | |
Technical Indicators |
