Home Companies Chuzhou HH Non Woven Technology CO.,LTD

High Speed Meltblown Fabric Production Line 300gsm 500KW

Contact Us

[China]

Trade Verify

Address: 116,Fuzhou Road,Suchu High-Tech Industrial Park Chuzhou City,Anhui Province,China

Contact name:Yuan

Chuzhou HH Non Woven Technology CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

High Speed Meltblown Fabric Production Line 300gsm 500KW

Country/Region	china
City & Province	chuzhou anhui

Product Details

newest design German technical China price meltblown fabric production line

What is the total electric energy it consumes at the same time?

About 500kW, the average power consumption is 250KW / h.

How many workers are needed per shift?

Three

How many hours does this machine run in a day?

The production line must operate 24 hours a day, because each setup requires a minimum of. Heating time of 2 hours. More importantly, each start and stop process consumes some water.

Is the installation and commissioning of the machine supported by your engineers?

Yes, but the installation fee is borne by you, including accommodation, board, transportation and pocket money.

How many spinners are there in the die? What is the distance between the centers of spinnerets?

We use a spinneret hole with a diameter of 0.25 mm, 2500 holes, and the distance between the two holes is 0.55 mm.

How to install the spinneret?

Installation: pre tighten the cleaned spinneret and spinneret with bolts. Check the gap between the spinneret and the spinneret with a feeler gauge. The general clearance is adjusted to 0.8-1.2mm; Tighten the bolts during adjustment. Finally, adjust the gap between the air knife and the spinnerets on both sides to one, and lock all bolts. Replace the filter screen and sealing ring. The spinneret assembly is installed on the die.

Description Melt blown machine raw material

Raw materials	pp polypropylene	Melting point	166℃
Spunbond pp melt index	28-45	Denier of spunbond fiber	1.8-2.5 denier
Meltblown pp melt index	1300-1800	Denier of melt blown fiber	1.6-4 microns

Technical Parameters

Model	HHM-1.6m	HHM-2.4M	HHM-3.2M
Effective Width	1.6 M	2.4 M	3.2 M
Weight Range	18-300 G/㎡	18-300 G/㎡	18-300 G/㎡
Out put day	2-3 Ton	3-4 Ton	4.5-5 Ton
Machine Speed	≦70 m/min	≦70 m/min	≦70 m/min
Power Consumption	3000º-3500º/Ton	3000º-3500º/Ton	3000º-3500º/Ton
Machine Size(LWH)	18M10M10M	18M11M10M	18M13M10M

Meltblown Making Machine Series

Model	Product Width (mm)	GSM Range ( g / ㎡ )	Capacity (kg /day )	Melt blown (BFE&PFE)
HHM- 1600	1600	15 - 300	200 - 300	BFE 99+ PFE 95+
HHM - 2400	2400		300 - 400
HHM - 3200	3200		450 - 500

Meltblown non-woven fabric production line components:

Screw extruder---->filter---->metering pump---->heating system---->melt blown box (Kasen)---->netting machine---- >Rewind

Meltblown production process flow chart:

Raw Material----> Melt Extrusion----> Filtration----> Metering----> Air Heating Compression----> Melt Blown----> Web Formation----> Winding

Meltblown non-woven fabric production line components:

Screw extruder---->filter---->metering pump---->heating system---->melt blown box (Kasen)---->netting machine---- >Rewind

(1) Receiving networked device:

Line speed: up to 50m/min

Meltblown receiving adjustment range: 200mm

Installation form: It can be moved horizontally, which is convenient for installation, debugging and maintenance

Driving rate: 1.1KW

(2) Suction net fan:

Power: 75KW,

4. Hot air heating system

(1) Atlas air compressor

Boost pressure: 0.7MPa

Power: 120KW~200KW

(2) Air heater

Heating power: 220KW-240KW

Material of tank and pipeline: stainless steel 304

Insulation form: stainless steel seal outside the insulation layer

5. Electret system.

6. Rack platform device:

Steel structure, easy to disassemble, firm and reliable, including stairs, etc.

7. Die head heating power: about 70kw

8. Electrical control box

High precisely CNC center

Exhibition Show

Packing & shipping

Main machine parts will be packed with wooden cases.Electrical parts will be packed with plastic and then packed into wooden cases.For the steel structure they will be packed in bulk into containers.

FAQ

1.Q : Are you a factory or trading company ?

A : We are established in 2009 , has been in onwoven industry for more than ten years .

2.Q: Do you have technical support?

A: yes , we will provide on-site installation service.

3 Q : How does your factory do regarding quality control ?

A: Quality is the most important principle . we always attach great importane to quality controlling from the very beginnging to the very end , our factory has passed CE and ISO certification .

4 Q :How long is you machine’s warrant period .

A : bascily one year warranty , long time service support .