Home Companies Suzhou Xunshi New Material Co., Ltd

Controlled Expansion Kovar Alloy , Hard Glass Sealing Iron nickel cobalt Alloy

Suzhou Xunshi New Material Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Room E-407, No.2, XugongQiao Road, Kunshan City, Jiangsu, 215332 China

Contact name:Allen Sun

Inquir Now

Suzhou Xunshi New Material Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Controlled Expansion Kovar Alloy , Hard Glass Sealing Iron nickel cobalt Alloy

Country/Region china
City & Province jiangsu
Categories Nickel
InquireNow

Product Details

Kovar Controlled Expansion Alloy Iron-nickel-cobalt Alloy for Hard Glass Sealing

 

 

Kovar is one of the most popular of the controlled expansion alloys for hermetic sealing applications. And it is one of A-ONE ALLOY's featured products. We stocks Kovar sheet, Kovar plate, Kovar rod, Kovar strip, Kovar wire, Kovar round bar as well as ingot. We make fast delivery to meet customer requirements.

 

And we also delivery Kovar in form of pipe, tube, capillary and part per customer spec&drawing.

 

Kovar was invented to meet the requirement for a reliable glass-to-metal seal. It is required in electronic devices such as light bulbs, vacuum tubes, cathode ray tubes, and in vacuum systems in chemistry and other scientific research. Most metals could not seal to glass because their coefficient of thermal expansion is not the same as glass, so as the joint cools after fabrication the stresses due to the differential expansion rates of the glass and metal cause the joint to crack.

 

Kovar’s non-linear thermal expansion curve can often be made to match a glass, thus allowing the joint to tolerate a wide temperature range. Chemically, it bonds to glass via the intermediate oxide layer of nickel oxide and cobalt oxide; the proportion of iron oxide is low due to its reduction with cobalt. The bond strength is highly dependent on the oxide layer thickness and character the presence of cobalt makes the oxide layer easier to melt and dissolve in the molten glass. A grey, grey-blue or grey-brown colour indicates a good seal. A metallic colour indicates lack of oxide, while black colour indicates overly oxidized metal, in both cases leading to a weak joint.

 

Chemical composition

29% Nickel, 17% Cobalt

 

Density: 8.24g/cm3

 

 

Coefficient of Thermal Expansion (Nominal):

30 oC - 400 oC  4.90(µm/m- oC)

25 oC - 300 oC  5.13(µm/m- oC)

30 oC - 450 oC  5.30(µm/m- oC)

25 oC - 100 oC  5.86(µm/m- oC)

25 oC - 500 oC  6.15(µm/m- oC)

25 oC - 900 oC  11.26(µm/m- oC)

 

Hot Products

INCONEL alloy 751 (UNS N07751) is a precipitation hardenable nickel-chromium alloy, used mainly for ...
Inconel 718Plus alloy (UNS N07818) is a precipitation hardened nickel-base material that exhibits ...
Non-Magnetic And Excellent Mechanical Properties Nickel Alloy 2.4816 Non-magnetic and Excellent ...
UNS N07818 High Temperature Resistance Inconel Nickel Alloy Inconel 718 is a nickel-chromium...
High Temperature Resistant 1300 °C Precipitation Hardened Nickel Based Alloy GH2747 GH2747 is a ...
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high ...