H-LIN INTERNATIONAL (HK) LIMITED |
|
Description:
The structure of GYTS cable is that 9/125 um single mode fiber or 50/125 um and 62.5/125 um multimode fiber are inserted into loose sleeve made of high water-resisting material and filled with hydration-resisting material. The center of the cable core is a metal reinforced core. For large core number optical cable, a PE coat is needed to strengthen the core. Loose sleeve and filling rope twist each other compact and round cable core around the center reinforcement core. The gap in the cable core is filled with water-blocking filler. Polyethylene sheathed cables are extruded after double-sided wrinkled steel strip (PSP) is longitudinally wrapped.
Specifications:
Loose casing material itself has good hydrolysis resistance and
high strength.
Filling characteristic ointment in tube, PE sheath with key sealing
protection for optical fiber has good anti-ultraviolet radiation
performance.
The single steel wire center reinforcement core is helpful for
parallel and tension resistance, abrasion resistance, impact
resistance, flattening resistance, repeated bending, torsion,
bending, winding (bending angle not exceeding 90 degrees) and
shooting of optical cables. It has good mechanical properties and
temperature characteristics.
The double-sided corrugated steel strip (PSP) improves the moisture
resistance of optical cable, and the corrugated part can be better
combined with PE sheath to make the structure stronger, has
good anti-ultraviolet radiation performance.
GYTS single-mode optical cable has the advantages of fast
transmission speed, long distance, good confidentiality,
anti-electromagnetic interference, good insulation, good chemical
stability, long service life, low loss, and good characteristics
and economic benefits.
Suitable for long distance communication and inter-office
communication
Laying method: overhead pipeline
Applicable temperature range: - 40 -+60.
Our Corrugated Steel tape Increased mechanical strength and improve the anti erosion capacity
Technical Parameters:
Item | Parameters | |
Loose tube | Material | PBT |
Color | All colors display | |
Filler | Material | PE |
Color | Black | |
CSM | Material | Phosphating steel wire |
Armoured | Material | Plastic coated steel strip |
Outer jacket | Material | MDPE |
Color | Black | |
Min. bending radius | Static | 10 times cable diameter |
Dynamic | 20 times cable diameter | |
Repeating bending | Load:150N;number of cycles:30 No obvious addition attention, no
fiber break and no cable damage. | |
Tensile performance | Short term | 1500N |
Crush | Short term | 1000N/100mm |