Active Member
|
[China]
Address: Room H,15/F,Siu King Building,6 On Wah Street,Ngau Tau Kok,Kowloon,Hongkong.
Contact name:Cathy
H-LIN INTERNATIONAL (HK) LIMITED |
|
|
EPON ONU 1GE+WIFI
Introduction
EPON and GPON are popular versions of passive optical networks (PONs). EPON is Fast Ethernet (100 Mbps) PON, while GPON is Giga bits Ethernet (10 Gbps) PON. POWERLINK's fiber optical access series of devices for the last-mile PON include OLT (Optical Line Terminal), ONU (Optical Network Unit) & ONT (Optical Network Termination), PON Splitters (PLC & FBT). We are proudly launching a series of integrated, high reliability and affordable EPON/GPON/ODN splitter solutions for all our customers to meet with fast growing demand of PON deployment.
ONU (Optical Network Unit) and ONT (Optical Network Termination) – ONU and ONT are basically the same device – ONT is located at the customer premise, and ONU is located outside the home. ONU can be working in different temperature and weather conditions. It should resist water, winds and vandals. The ONU usually communicates with an optical network terminal (ONT), which may be a separate box that connects the PON to TV sets, telephones, computers, or a wireless router. The ONU/ONT may be one device.
Epon/Gpon is designed to meet the FTTH broadband access, fiber to the desk (FTTO). high reliability, easy management and excellent quality of service (QoS) guarantee
ONU/ONT products fully comply with IEEE 802.3-2005 and the China Telecom EPON/GPON device technical specification (V2.1). It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber.
Characteristics
Conform to ITU-T G.984 GPON standards.
Support Ethernet service layer 2 switching and wire-speed forwarding of uplink and downlink services
Support frame filtering and suppression
Support standard 802.1Q Vlan function, support VLAN conversion
Support 4094 VLANs (802.1Q)
Support Dynamic Bandwidth Allocation (DBA) function
Support QoS, including traffic flow classification, priority marking, queue and dispatch, traffic shaping and traffic control, etc
Single ONU supports up to 1 LLID.
Support IGMP Snooping
Support Ethernet port ratelimit loop detection
Support power failure alarm
Support lightning protection for power supply and lightning protection for service port
Complies with 2.4GHz IEEE802.11n v2.0 and backward compatible with IEEE 802.11b/g standards
Supports NAT/NAPT IP sharing
WAN Protocols: PPPoE/StaticIP/PPTP/DHCP
Supports advanced 2T2R MIMO technology to enhance the throughput and coverage range significantly
High speed data rate - up to 300Mbps
Port features:
1 PON ports (2.5G)
1 10/100/1000M port
1 WLAN Port
Physical features:
Power supply: 12VDC
Power consumption: 6W
Temperature:
>Working temperature:0~55℃
>Storage temperature: -30~60℃
>Relative humidity: 10~90% (non-condensing)
Specifiaction
| Parameter Name | Hardware Parameter |
| EPON | |
| PON | SC single-mode/single-fiber, symmetric 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Sensitivity | <-27dBm(PX20+) |
| Overload | >-3dBm(PX20+) |
| Optical Type | SC/PC |
| Interface Type | 1*10/100/1000Mbps |
| Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connector | |
| Wireless | Compliant with IEEE802.11b/g/n, 300Mbps, |
| 2T2R one external antenna and one internal antenna | |
| Indicators | 5, For WiFi,LINK,REG,LOS,POWER |
| Power adapter input | 220V AC,50HZ |
| Ambient temperature | 0℃ ~ +55℃ |
| Ambient humidity | 10% ~ 90%(non-condensing) |
| Store temperature | -30 ~ +60℃ |
| Store humidity | 10% ~ 90%(non-condensing) |
| Dimension(L x W x H) | 120mm×78mm×30mm + External antenna |
| Power | 12V,0.5A |
| Power Consumption | ≤5.3W |
Show
