Active Member
|
[China]
Address: Room H,15/F,Siu King Building,6 On Wah Street,Ngau Tau Kok,Kowloon,Hongkong.
Contact name:Cathy
H-LIN INTERNATIONAL (HK) LIMITED |
|
|
Media converter uncontrollable 10G OEO converter with two SFP +
ports. Conversion of 10G-BASE-FX / 10G-BASE-FX.
Description:
Standalone 10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional , which uses optical -electricity – optical conversion principle to realize optical signal regeneration , enabling of the optical signal amplification and regeneration , re-timing, and wavelength conversion , with coarse / dense wavelength division multiplexing together to realized WDM transmission . It is now possible to quickly improve communication capacity , expand the bandwidth on present network , while using low-cost, high cost-effective solutions to manage and run the system , easy operation .
10G OEO Converter is a high performance,low power consumption
optical transmission system. It is based on the principal of
optical - electrical - optical conversion to regenerate the optical
signal, which can realize the optical signal regeneration and
amplification, and wavelength conversion. It can realize the WDM
transmission when used together with CWDM/DWDM Mux/Demux. It can
improve the communication capacity and bandwidth, and use low cost
high performance solutions to manage and operate the system, which
is easy to manage and maintenance.
Protocol:
IEEE802.3 Ethernet standard
IEEE802.3u Fast Ethernet standard
IEEE802.3d Spanning Tree
Key Features
Technical Specifications:
| Performance Data | Technical Indexes |
| Equipment function | 3R Repeater |
| Transmission Speed | 10Gb/s ( 9.95Gb/s-11.35Gb/s ) |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| Access Type | 10G LAN/ 10G WAN |
| Interface Type | Type A: SFP+ To/From SFP+ Type B: SFP+ To/From XFP Type C: XFP To/From XFP |
| Transmission Distance | SFP+ module: Up to 80Km XFP module: Up to 80Km |
Maximum Packet Forwarding Rate | 14,880,950/S |
Network management information: | • Card type information • SFP+ or XFP fiber module detection • SFP+ or XFP fiber module DMI function ( Temperature , Voltage , Optical power ) • Link status detector • Enable/Disabled Loopback test function • Enable/Disable PRBS Generator and checker function • Rate select ( 10Gbase-Lan or Wan ) • Remote card's status monitor ( only in pairs ) |
| power requirement | Rack-mountable : AC 85 ～ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤6W |
| Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% ( non-condensing ) |
| Dimension | Card : 115mm ( W ) × 78mm ( D ) Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H ) |
| Description | Remark |
| 10G OEO Converter (3R Repeater) | SFP+ TO SFP+ |
| 10G OEO Converter (3R Repeater) | SFP+ TO XFP |
| 10G OEO Converter (3R Repeater) | XFP TO XFP |
Package:
