|
[China]
Trade Verify
Address: 2F, G4 of TianFu Software Park, Chengdu, China.
Contact name:Jerry
Chengdu Shuwei Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
NetTAP® Network Packet Broker NT-iTAP-5GS for Traffic Replication
and Aggregation
It is designed for your GE Network Smart Monitoring and Security
applications.
1- Overviews
2- Features
ASIC Chipset | RJ45 GE Acquisition |
Smart Bypass |
Data Replication |
Data Aggregation |
Data Distribution |
3- Application Structures
3.1- Inline Data Monitor(I type)
3.2- Inline Data Aggregation (I type)
3.3- Bypass(I type)
3.4- Data Replication (I & S type)
4- Intelligent BYPASS (does not Affect the Link Transmission)
NT-iTAP-5GS/I built-in smart BYPASS module can support not only on the power and
electric automatic BYPASS switch without delay, and has a unique
port state monitoring technology to provide the consistency of the
uplink and downlink port Link state guarantee, to meet your network
equipment redundancy protocol (such as dynamic routing protocol
OSPF routing) can be quickly detected correctly neighbor equipment
state changes, to achieve the effect of rapid convergence.
Inline Traditional TAP:
The Traditional TAP cannot quickly reflect to the uplink port state
when the downlink link fails (such as link loss), so it takes a
long time to switch the traffic transfer redundant link between SW1
and SW3 through the discovery mechanism of the upper layer dynamic
routing protocol. The network reliability and recovery time are
prolonged.
NT-iTAP-5GS/I Intelligent BYPASS Technology:
NT-iTAP-5GS/I adopts Intelligent BYPASS Technology, which can timely detect and
timely report the failure of port link to the uplink port in case
of failure of downlink port link, and intelligently close the
uplink port link so that the uplink port of SW1 can timely perceive
the failure of interconnect port of SW3. It can quickly enable
redundant equipment and routing mechanism to achieve the fast
switching of traffic, effectively shorten the recovery time of
network failure and enhance the reliability of the network.
Ease to Use
- The device is fixed with 1 Inline IN/OUT port, 2 one-way traffic
monitoring ports (TX/RX respectively), and 1 traffic aggregation
monitoring port. The installation can be completed according to the
port panel instructions without any jumper or other complex
configuration.
- Status monitoring. The device has 1 system status indicator and 1
power indicator. Each port has Link rate status indicator and
LinkActivity data activity indicator, which can clearly indicate
the current working status of the system.
5-Specifications
| NetTAP® Network Packet Broker (NPB/TAP) | I Type | S Type | |
Interface Type | Network Port | GE Port(A/B) | GE Port (GE0-GE4) |
| Monitor Port | GE Port(A/B/AB) | ||
| Function | Max Ports | 5 ports | 5 ports |
| Traffic Replication | Support 1->4 | Support 1 -> 4 | |
| Traffic Max Speed | 1G | 1G | |
| Aggregation TX/RX | Support | - | |
| Monitor TX/RX | Support | - | |
| Bypass TX/RX | Support | - | |
| Electric | Power Supply | 12V-DC | |
| Frequency | - | ||
| Current | 1A | ||
| Power | <10W | ||
| Environments | Work Temperature | 0－50℃ | |
| Storage Temperature | -20-70℃ | ||
| Work Humidity | 10%-95%,No Condensation | ||
| Size | L(mm)*W(mm)*H(mm) | 180mm*140mm*35mm | |
NT-iTAP-5GS Intelligent Network TAP Datasheet.pdf
