Home Companies changzhou fums bearing co.,ltd

GCr15 One Way Clutches 200 For Elevator Industrial Machines P6 Precision Drawn Cup Needle Roller Clutch

Active Member

Contact Us

[China]

Address: Room 3b-304, building 3, chuangyan port, science and education city, wujin district, changzhou city.

Contact name:jodie

changzhou fums bearing co.,ltd

GCr15 One Way Clutches 200 For Elevator Industrial Machines P6 Precision Drawn Cup Needle Roller Clutch

Country/Region	china
City & Province	changzhou jiangsu

Product Details

GCr15 One way clutches 200 for Elevator/Industrial Machines P6 Precision(drawn cup needle roller clutch)

Decription of products:(drawn cup needle roller clutch)

One-way clutch is composed of outer seat ring, inner seat ring, retainer, wedge block, etc.When the inner seat ring is fixed, the outer seat ring rotates the wedge clockwise without locking, and the outer seat ring can rotate freely.When the outer seat turns counterclockwise, the wedge lock, the outer seat cannot rotate.

The purpose of the cage is to make the wedge always tilt slightly in the direction of the locking outer ring to enhance the locking function of the wedge.

Installation and Usage:(drawn cup needle roller clutch)

1. 200 Series Cam Clutch is shaft mounted, so the shaft on which the clutch is mounted must be hardened to Rc 56-60 and 1.5 mm case depth after grinding. Grind to 1.5S (16micro-inch) finish. The taper of this shaft should not exceed 0.01 mm per 50mm.
2. For installation of the clutch, mount the clutch with bearings at both sides or on one side in order to obtain concentricity between the shaft and the clutch outer race and to take up radial or thrust loads which may work on the outer race or the shaft. See the installation example.
3. The clutch should be mounted on the shaft by rotating it in the direction marked by the arrow
shown on the clutch plate. Do not apply shock to the clutch by hammering.
4. The clutches have the same outside diameters as the bearings shown in the table above. Bore tolerance of the housing in which the clutch is assembled should be within the range shown in the table below.
5. For indexing, oil lubrication is recommended.
6. Concentricity of the housing bore and shaft should be within 0.05 mm.
7. Key profile should be in accordance with JIS B1301-1959.

Catalogue of other models:(drawn cup needle roller clutch)

Size		Overrunning speeds		Øa	Øc	Sprag space	emin	Ødmin	Øbmax	Number of clips	Number of sprags	Weight
				+ 0,008	± 0,013
				- 0,005
	TKN1[Nm]	nimax [min-1]	Namax2 [min-1]	[mm]	[mm]	[mm]	[mm]	[mm]	[mm]			[kg]
DC2222G	63	8600	4300	22.225	38.885	8.33	10	50	15	-	12	0.03
DC2776	119	6900	3400	27.762	44.422	8.33	13.5	58	18	-	14	0.055
DC3034	124	6300	3100	30.34	47	8.33	13.5	62	20	-	14	0.06
DC3175(3C)	159	6000	3000	31.75	48.41	8.33	13.5	63	24	3	16	0.06
DC3809A	275	5000	2500	38.092	54.752	8.33	16	71	29	-	18	0.085
DC4127(3C)	224	4600	2300	41.275	57.935	8.33	13.5	75	32	3	18	0.09
DC4445A	363	4300	2100	44.45	61.11	8.33	16	79	34	-	20	0.095
DC4972(4C)	306	3800	1900	49.721	66.381	8.33	13.5	86	38	4	22	0.1
DC5476A	525	3500	1700	54.765	71.425	8.33	16	92	42	-	24	0.11
DC5476A(4C)	525	3500	1700	54.765	71.425	8.33	16	92	42	4	24	0.13
DC5476B(4C)	769	3500	1700	54.765	71.425	8.33	21	92	42	4	24	0.18
DC5476C(4C)	990	3500	1700	54.765	71.425	8.33	25.4	92	42	4	24	0.2
DC5776A	604	3300	1600	57.76	74.42	8.33	16	98	44	-	26	0.11
DC6334B	806	3000	1500	63.34	80	8.33	21	104	50	-	26	0.175
DC7221(5C)	675	2600	1300	72.217	88.877	8.33	13.5	115	56	5	30	0.14
DC7221B	1279	2600	1300	72.217	88.877	8.33	21	115	56	-	30	0.185
DC7221B(5C)	1279	2600	1300	72.217	88.877	8.33	21	115	56	5	30	0.21
DC7969C(5C)	2038	2400	1200	79.698	96.358	8.33	25.4	124	61	5	34	0.28
DC8334C	2055	2300	1100	83.34	100	8.33	25.4	132	65	-	34	0.27
DC8729A	1250	2200	1100	87.29	103.96	8.33	16	134	67	-	34	0.165
DC10323A(3C)*	1612	1800	900	103.231**	119.891	8.33	16	155	80	3	40	0.205
DC12334C*	4800	1500	750	123.34	140	8.33	25.4	184	96	-	50	0.4
DC12334C*	4800	1500	750	**	140	8.33	25.4	184	96	-	50	0.4
DC12388C(11C)	4875	1500	750	123.881	142.88	9.5	25.4	196	96	11	44	0.4

Catalogue of other models:(drawn cup needle roller clutch)

Picture:(drawn cup needle roller clutch)

Our Needle Roller Bearing Catalogue

Cylindrical Roller Bearing
Auto Parts
Automobile Bearings
Bearing Inner Ring
Clutch Bearing
Combined Needle Roller Bearing
Combined Needle Roller Bearing With The Inner Ring
Curve Roller Bearings
Cylindrical Roller Bearings With Snap Ring
Cylindrical Roller Bearings With Snap Ring Groores
Drawn Cup Needle Roller Bearing With Retainer
Drawn Cup Needle Roller Bearing With Ring
Drawn Cup Needle Roller Bearing With Seal Ring
Drawn Cup Needle Roller Clutch
Drawn Cup Full Complement Needle Roller Bearings
Drawn Cup Needle Roller Bearing
Drawn Cup Needle Roller Clutch Assembly
Full Complement Cylindrical Roller Bearings
Full Coplement Needle Roller Bearing With Or Without Inner Ring
Heavy Duty Bearing
Needle Bearing Inner Ring
Needle Bearing Manufacturer
Needle Roller And Cage Assemblies
Needle Roller Bearing
Needle Roller Bearing Without Inner Ring
Needle Roller Without Shoulder And Inner Ring
Needle Roller Without Shoulder And With Inner Ring
No Collar Slab Roller And Cage Assemblies
Non-Standard Bearings
One Way Clutch
One-Way Needle Roller Bearing
Overrunning Clutch
Radial Needle Roller And Cage Assemblies
Rod-Use Needle Roller And Cage Assemblies
Roller Pins
Rollering Bearings
Seal Ring Needle Roller Bearing With Inner Ring Or Without Inner Ring
Sealed Needle Roller Bearings
Seat Ring
Self-Aligning Needle Bearing
Shaft Ring
Solid Collar Needle Roller Bearing
Sprag Type One-Way Clutch
Supporting Roller Bearings
Thrust Ball Bearing With Flat Seat
Thrust Cylindrical Roller And Cage Assemblies Seat Ring Shaft Ring
Thrust Needle Roller Bearings
Thrust Washer etc.

Hot Products

84836000 Gcr15 Free Wheel One Way Clutch Roller Type CKA50125 For Motorcycle Drawn Cup Needle Roller Clutch

Contact Us

changzhou fums bearing co.,ltd

GCr15 One Way Clutches 200 For Elevator Industrial Machines P6 Precision Drawn Cup Needle Roller Clutch

Product Details

GCr15 One way clutches 200 for Elevator/Industrial Machines P6 Precision(drawn cup needle roller clutch)

Decription of products:(drawn cup needle roller clutch)

Installation and Usage:(drawn cup needle roller clutch)

Catalogue of other models:(drawn cup needle roller clutch)

Picture:(drawn cup needle roller clutch)

Hot Products

84836000 Gcr15 Free Wheel One Way Clutch Roller Type CKA50125 For Motorcycle Drawn Cup Needle Roller Clutch

Single Row Steel One Way Clutches No Inner Ring 200520100255.1 Open Seal Drawn Cup Needle Roller Clutch

Low Noise One Way Roller Clutch ASNU45 One Way Clutch Bearing Single Row Drawn Cup Needle Roller Clutch

GCr15 One Way Clutches 200 For Elevator Industrial Machines P6 Precision Drawn Cup Needle Roller Clutch

B206 Series Backstop Cam Clutch 25 To 42 Mm Width 1 Way Clutch Light Weight Drawn Cup Needle Roller Clutch

Sealed Bearing Steel Sprag Type One Way Clutch DC3175 On Machinery 84836000 Drawn Cup Needle Roller Clutch