|
[China]
Trade Verify
Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Contact name:Shifen Yuan
HUATEC GROUP CORPORATION |
|
Verified Suppliers
|
|
|
Image Quality Indicator (IQI) Wire Type Penetrameters Accessories For X-Ray Flaw Detector
EN 462-1 wire type
EN 462-1 Wire Type were introduced as a EUROPEAN STANDARD to
supersede the German Standards (DIN 54. 109)
and the British Standards Institute (BS3971:1980 type 1) Image
Quality Indicators. Each indicator consists of a series
of seven parallel wires of different thickness mounted and
encapsulated between two thin sheets of transparent, flexible
PVC. A lead monogram indicates the number of the thickest wire, the
material and the EN symbol.
Wire Diameters:
| Wire Number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Wire Diam(mm) | 3.20 | 2.50 | 2.00 | 1.60 | 1.25 | 1.00 | 0.80 | 0.63 | 0.50 | 0.40 |
| Wire Number | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | |
| Wire Diam(mm) | 0.32 | 0.25 | 0.20 | 0.16 | 0.125 | 0.10 | 0.08 | 0.063 | 0.05 |
Indicator Sizes:
There are four sizes of EN Image Quality Indicators.
Size 1- contains wire numbers 1 to 7 and used for material thicknesses in
the range of 40 t 1 60mm
Size 6- contains wire numbers 6 to 12 and used for material thicknesses
in the range of 12.5 to 50mm
Size 10一contains wire numbers 10 to 16 and used for material thicknesses
in the range of 5 to 20mm
Size 13 - contains wire numbers 13 to 19 and used for material thicknesses
in the range 2.5 to 1 0mm
AlI sizes are available in Steel(Fe), Aluminium(AI), and Stainless
Steel(SS). Copper(Cu), Zirconium(ZR) Image
Quality Indicators are only available in sizes 6 and 10. Nickel(Ni)
Image Quality Indicators are only available in
sizes6, 10 and 13.
As an ilustration the identification (i.e. lead monogram) for, say
Size 10 (Wire numbers 10 to 16) in steel(Fe)
would be 10FE EN.
DIN 54 109 wire type
DIN 54 109 Wire Type Image Quality Indicators are
similar to the EN 462-1
.u.s, theWre dinetere are the same, an there are ihe same wire
numbersin eaeh size of
Inicaior.rmri only dfrence being that the lead monogram reads DIN
rather than EN.
Example: size 6Wire numbers 6 to 12)in Stanles sel(s)would be 6
DINSS.
EN 462-2 stepwedge/hole type penetrameters
Stepwedge in shape and ailable in four Model Numbers H5, H9 and H13
in Seel
| Model No. | Stepwedge Range | Material Thickness |
| H5 | 0.32 to 1mm | 16 to 50mm |
| H9 | 0.8 to 2.5mm | 40 to 125mm |
| H13 | 2TO6.3mm | 100 to 315mm |
ASTM E747 wire type penetrameters
ASTM E747 Wire Type Penetrameters consists of a series of six
parallel wires of different thicknesses,
encapsulated between two thin sheets of transparent, flexible PVC.
Lead characters identify the thickness of
the thickest wire, and the material group(1-FE, 01-Ti, 02-AI,
03-Mg, 3-Ni, 4-Cu). The letters ASTM are also
included.
| Set No. | Wire No. | Dia. Mm | Dia. Ins |
| A | 1 | 0.08 | 0.0032 |
| - | 2 | 0.10 | 0.0040 |
| - | 3 | 0.13 | 0.0050 |
| - | 4 | 0.16 | 0.0063 |
| - | 5 | 0.20 | 0.0080 |
| - | 6 | 0.25 | 0.0100 |
