Home Companies HUATEC GROUP CORPORATION

Touch Screen Phased Array Ultrasonic Flaw Detector Portable 64 Ch Waterproof

Contact Us

[China]

Trade Verify

Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096

Contact name:Shifen Yuan

HUATEC GROUP CORPORATION

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Touch Screen Phased Array Ultrasonic Flaw Detector Portable 64 Ch Waterproof

Country/Region	china
City & Province	beijing beijing
Categories	Other Access Control Products

Product Details

Water-Proof And Oil-Proof Fan-Free And With Touch Screen Portable 64-CH Phased Array Ultrasonic Flaw Detector

Introduction

HPA-500 is a portable 64-CH phased array ultrasonic flaw detector originally developed by HUATEC. It is water-proof and oil-proof , fan-free and with touch screen. Whole-process data logging, innovative phased array probes and inspection methods being the advantages, this model guarantees superior performance and support, which makes it among the best of its kind for high C/P ratio.

Main Function

★ File & Entry Management System for Flexible Bridging between setting (Focal Law & Model), Calibration and Inspection

★ Modular Configuration: L-Scan, S-Scan, L-C-Scan, S-C-Scan, Butt-Weld, CrankShaft , Pipeline, TOFD, UT(Conventional),

★ 3D Simulation Model

★ Image analysis

★ Natural Structure of Heat Dissipation

★ Dynamic Depth Focusing (DDF)

★ Smooth Filtering

★ Touch Screen

★ ACG Calibration

2.1 Features

16:64 configuration & 2 conventional channels (HPA-500: plus 2 TOFD channels)
The 3D modeling scheme, customizable for one-stop solutions.
Image smoothing, for finer presentation
Dynamic depth-focusing, for high discernibility at different depths
Omnisealed, water&dust -proof but capable of fan-free heat dissipation, over any adversities.
Delay precision up to 2.5ns, for evident inhibition on sidelobes so as to enhance vertical and horizontal discernibility, as well as to improve imaging definition.
Responsive A/L/S/C scan imaging; Encoder used for continuity of 100%-original-data logging.
Supportive of ACG and TCG curves specified by ASME, to solve the problem of uneven energy distribution and poor measurement accuracy.
Automatic generation of focal laws according to beam angle, focal length, scan mode, specs of probe and wedge, with optimized angle stepping of S-scan.
3 options of filtering: 0.5-9.6MHz, 2.5-12.9MHz, 3.8-19MHz; Auto Optimization of pulse width according to probe frequency; Excellent noise filtration
11-inch IG & WVGA (800x600) TFT display, touch screen, ensuring nice visual effect outdoors or in the sun.
USB port for instant data dump; HDMI port for external display of unlimited size.
AC/DC optional, single battery, ensuring 6+ working time.

2.2 Specification

Channel Configuration

Mode	PA	UT	TOFD(HPA-500)
Channel	16:64	2	2

Physical Specification

Display	11-inch 800X600 TFT color display
Transducer Ports	I-PEX 160-pin PA transducer port; Lemo-00 conventional transducer Port, for either T-R or T&R
I/O Ports	USB2.0 Port: 2(qty)
	HDMI; encoder
	LAN(Gigabit-NIC);
	WIFI
	I/O (commissioning)
	2D Encoder
Memory	In-Built: 16G RAM+4GB FLASH ;SD card (max to 32G); External: USB drive
Weight	3.5Kg (with 1 battery)
Dimension	284mm×202mm×95mm
Power Supply	AC:100～240V,50～60Hz；DC:12V
Charging	(battery) within or individually
Battery Life	6 Hours
Working Power	26W
Language	English
Temperature Conditions	Ambiance:-20℃～50℃ Storage:-20℃～60℃
IP	54

Performance Specification

Mode	PA	UT	TOFD(HPA-500)
PRF	50Hz～10kHz	50Hz～10kHz	50Hz～10kHz
Voltage	Bipolar, ±45～±100V, with 5V per step	Negative Square Wave, -75V～-250V, with 25V per step	Negative Square Wave, -75V～-250V, with 25V per step
Pulse Width	20ns～800ns, with 5ns per step	20～800ns, with 5ns per step	20～800ns, with 5ns per step
Damping	50Ω	80Ω / 400Ω	80Ω / 400Ω
Sampling Rate	125MHz	200MHz	200MHz
Delay PRN	2.5ns	N/A	N/A
Rx Delay	0～40us	N/A	N/A
Bandwidth	0.5MHz～19MHz	0.5MHz～15MHz	0.5MHz～15MHz
Gain	0.0～80dB	0.0～110.0dB	0.0～110.0dB
Filter	0.5-9.6MHz; 2.5-12.9MHz; 3.8-19MHz; Optional	broadband, narrowband	broadband, narrowband
Rectification	FW	FW	RF
Reject	0~80%	0~80%	0~80%
Scan Mode	A/L/S/C	A	A/D
Triggering	Encoder	N/A	Encoder
Scan Line	Max 128	N/A	N/A
Skew	L-scan:-89°～+89° S-scan:-89°～+89°	N/A	N/A
Smart-Cal	Velocity/Delay/ACG/TCG/Encoder	DAC/DGS	Delay/X-Value/PCS/ Wave/Encoder
Range	0.0～1000mm, min 1mm	0.0～2000mm	0.0～2000mm
Displaying Delay (max)	1000mm	2000mm	2000mm
Pulse Shift (max)	N/A	2000mm	2000mm
Unit	mm	mm	mm
Gate	A/B	A/B	A/B
Gate Start	Available within the range	Available within the range	Available within the range
Gate Width	Available within the range	Available within the range	Available within the range
Gate Threshold	0-100%	5-95%	0-100%
Alarm Signal	Buzzer / LED	Buzzer / LED	Buzzer / LED
Spotting	Crest / Flank	Crest / Flank	Crest / Flank
Readout	Amp/Path/ Horizontal/Depth	Amp/Path /Horizontal/Depth	Amp/Path /Horizontal/Depth
Resolution	0.5mm	0.1mm	0.1mm

3D Simulation Model

The 3D simulation scheme can be customized to offer one-for-all solutions.

APP Menu

Menu of the software is shown in the manner of APP.

It can be cut down or enlarged accordingly if asked by the users.

Specification Application

1.Common or special welded seam of steel structure, utility boiler, pressure vessel, pipeline, nuclear power infrastructures, watercraft, oil tank, ethylene tube, etc.
2.Railway welded seams, locomotive wheel sets and axles.
3.Aluminum alloy FSW butts and bonding of composites used in aerospace industry.
4.Blades and bolts used in power industry.
5.Cases when there’s not enough space for movement whilst inspection; Cases when conventional UT is preferred.

Packing Details

HPA-500 1pc

PAUT Probe 1pc

PAUT Probe Wedge 2pcs

UT Normal Probe 2.5P20 1pc

UT Angle Probe 2.5P13×13 60°1pc

UT Probe Cable LEMO 00-BNC 2pcs

Li-ion battery 1pc

Charger 1pc

Power converter 1pc

HDMI Cable 1pc

Crossover Cable 1pc