|
[China]
Trade Verify
Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Contact name:Shifen Yuan
HUATEC GROUP CORPORATION |
|
Verified Suppliers
|
|
|
IIW V-2 A4 Ultrasonic Calibration Block for on-site checking of miniature shear wave probe index, time base, beam angle and gain
Specifications:
Calibration blocks is an important supplementary material in the
Ultrasonic testing, used to calibrate the sensitivity of the
ultrasonic flaw detector and ultrasonic probe. Our testing block is
certificated by the authority of the state depeartment. Our
products include: domestic standards UT blocks, European standard
UT block, NDT block, hexagonal testing block, and so on. Processing
of the special specifications UT block
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 2.5mm and 50 mm radius, 1.5mm hole (or 3mm or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
Dimensions: 75mm x 43mm x 12.5mm
Net Weight:0.5kg Gross Weight:0.75kg Approximate Weight( Carbon
Steel)
Made from 1018 carbon steel, or LY12/6063/7075 aluminum, or 304
stainless steel. Duplex stainless Steel
Also available in 20mm and 25mm thicknesses for calibration of
non-miniature probes.
