|
[China]
Trade Verify
Contact name:Leo
Henan Aile Industry CO.,LTD. |
|
Verified Suppliers
|
|
|
Sterile Surgeon Gown Reinforced Surgical Gowns Hospital Disposable Sergical Gowns Surgeon Room Clothes
A surgical gown is a personal protective garment intended to be worn by health care personnel during surgical procedures to protect both the patient and health care personnel from the transfer of microorganisms, body fluids, and particulate matter.
Surgical Gown Reinforced is a cloth for surgeons wear during hospital surgery or treatment of patients. It usually made by high quality non woven SMS fabric. The ultra fabric used in the reinforced impermeable sleeves and chest area in the reinforced surgical gown.
Details Description
1.Seams:Stitched seams/Sonic-welded seams.
2.Long sleeve,Elastic/Knit cuff ,Tie-on neck and waist/velcro on
neck.
3.Application:Designed for tasks or use in areas such as ER,
Trauma, Burn Unit,Critical Care Units, Arterial Blood Draw, IV Line
Insertion.
Reinforced surgical gowns are specialized garments worn by healthcare professionals during surgical procedures to provide a protective barrier between the wearer and potential sources of contamination. These gowns are designed to offer a higher level of fluid resistance and durability compared to standard surgical gowns.
The reinforced feature of these gowns typically refers to an additional layer of material or reinforcement in critical areas such as the front torso, sleeves, and shoulders. This reinforcement enhances the gown's resistance to fluid penetration, providing an extra level of protection against blood, bodily fluids, and other potentially infectious materials.
Reinforced surgical gowns are made from various materials, including non-woven fabrics, such as spun-bonded polypropylene or SMS (spunbond-meltblown-spunbond) fabric. These fabrics are chosen for their fluid resistance, breathability, and comfort.
The gowns typically have long sleeves with elastic cuffs to ensure a secure fit and prevent exposure of the arms. They often feature a wrap-around design with a tie or snap closure at the back, providing full coverage of the front and back of the wearer's body.
The purpose of reinforced surgical gowns is to minimize the risk of transmission of infections from both the patient and the healthcare personnel. They act as a physical barrier, reducing the potential for contamination and protecting the wearer from exposure to infectious agents.
Application:
1.Seams:Stitched seams/Sonic-welded seams.
2.Long sleeve,Elastic/Knit cuff ,Tie-on neck and waist/velcro on
neck
3.Application:Designed for tasks or use in areas such as ER,
Trauma, Burn Unit,Critical Care Units, Arterial Blood Draw, IV Line
Insertion
| Properties | Medical Polymer Materials & Products |
| Type | General Medical Supplies, Surgical Supplies |
| Style | With Tie/Magic stick on back neck and waist ,with wrap or not, thread sewing or ultrasonic sewing |
| Color | Blue,dark blue |
| Storage | Stored in dry, humidity below 80%, ventilated, non-corrosive gases warehouse |
Method of Use:
1. Lift the collar with the right hand and stretch the left hand
into the sleeve. Pull the collar upward with the right hand and
show the left hand.
2. Change to hold the collar with the left hand and stretch the
right hand into the sleeve. Show the right hand. Lift both hands to
shake the sleeve. Be careful not to touch the face.
3. Hold the collar with both hands and fasten the neckband from the
center of the collar along the edges.
4. Pull one side of the gown (about 5cm below the waist) forward
gradually, and pinch it when seeing the edge. Use the same method
to pinch the edge on the other side.
5. Align the edges of yourgown with your hands behind your back.
6. Fasten the waistband behind your back.
