Nano Micro provides plastic spacers with high quality and accurate particle size control.
NM LCD spacer sells well all over the world with its excellent display performance.
A precise control of LCD cell gap containing liquid crystal is
critical to achieving the best display performance. Spherical
particles used to control the thickness of the liquid crystal layer
must meet stringent requirements such as precise particle size,
tight particle size distribution, suitable hardness, and excellent
resistance against heat, cold and chemicals.
NM LCD SPACER Characteristics
Uniform sphere and smooth surface
Accurate particle size control
Narrow particle size distribution
Excellent resistance against heat, cold and chemicals
Good dispersity and no aggregation
Excellent mechanical strength and superior crush resistance
Free from contaminations
Typical characteristics of NM Spacer:
Typical characteristics of NM Spacer:Precise Particle Size Control of NM PLASTIC SPACER:Impurity Control of NM PLASTIC SPACER:The amounts of ions in PLASTIC SPACER are critical and tightly
controlled in the entire manufacture processing. The amount of Fe,
Ca, K, Na is detected by ICP spectrometer and Cl by ion
chromatography.
NM PLASTIC SPACER Meets RoHS Requirements:
NM PLASTIC SPACER do not contain any chemicals prohibited by RoHS.
NM PLASTIC SPACER is inspected yearly by an internationally
certified agent to meet all RoHS requirements. The RoHS
certification of NM PLASTIC SPACER is current and valid, a copy of
which can be sent upon request.
Type and Size of NM PLASTIC SPACER:
Nano-Micro Tech provides three series (H, X and A) of high quality
plastic spacers to meet various demanding application requirements
for different customers. The three series of plastic spacers, in
the order of increasing hardness, modulus, and recovery are H, X
and A.
NM PLASTIC SPACER provides a broadest size selection from 2 m to
100 m. Our state-of-the-art manufacture facilities, advanced
analytical instruments and reliable quality control system
guarantee the quality and reproducibility of NM PLASTIC SPACER
products.
General rules: NM HT XXX;NM HS XXX;NM XT XXX;NM XS XXX;NM AS XXX;NM
ASE XXX
NM - NanoMicro
T - TN; S - STN
XXX - diameter, for example: 065 6.5 m, 100 - 10.0 m
l Standard products are: 2.0-5.0 m in 0.25 m increments; 5.0-10.7 m
in 0.10 m increments; above 11.0 m in 1.0 m increment.
l Spacer of special size, below 2.0 m or above 100.0 m, is
available upon request.
l Mean diameter of spacer is consistent from lot-to-lot according
to Beckman Coulter Counter Multisizer 3.
Recommended Spraying Methods of NM PLASTIC SPACER:Dry SprayFor best results, it is recommended to vacuum dry NM
PLASTIC SPACER at 80 °C for 8 hrs (caps off) before dry spraying,
which ensures SPACER disperse smoothly and freely.
Wet Spray: Disperse NM PLASTIC SPACER in organic solvent such as
isopropanol or ethanol, ultrasonicate a while before adding proper
amount of water. This usually works better than dispersing SPACER
directly in aqueous solution containing of organic solvent.
Recommended spraying density:Spraying density and applied pressure should be adjusted according
to SPACER size etc.. Service technicians from Nanomicro Technology
Company are professionally trained to help our customers to achieve
best results.
Packaging and Storage of NM PLASTIC SPACERNM PLASTIC SPACER is packaged in 10 g or 20 g glass vials with
plastic caps and inserts to keep moisture away from the contents.
PET vials of 10 g or 20 g are also available upon request. The
label on the vial includes product name, lot number, expiration
date, weight, RoHS, inspection passing stamp, etc.
NM PLASTIC SPACER vials should be stored in dehumidifying cabinets
with controlled temperature and humidity. The cabinet should be