|
[China]
Trade Verify
Address: No.91 Taoyuan R.D. Yaozhuang Industry Jiashan County Zhejiang PR. China
Contact name:Light Sheng
Jiashan Dingsheng Electric Co.,Ltd. |
|
Verified Suppliers
|
|
|
IEC 10 Way Outlets Power Strip with Rocker Switch , Aluminium Alloy
UL approved American PDU
Product Overview
The SFC-IEC-A2B is a 15Aor10A 2 to 24-outlet gray plug-in Power Strip with IEC connector. This International power strip provides power safely and conveniently to use. The input is provided with a male IEC320 receptacle, outputs are provided with a female IEC320 receptacle. It is ideal for use in a wide variety of settings, including relay racks and cabinets, laboratories, workshops, classrooms and offices.
.User-ready outlets
.Single-pole circuit breaker with switch
. 1.2 to 9.5" Center-to-centre receptacle
.Rugged construction
.Space saving
.Low profile
.Snap-on, slide-off mounting
Feature
1.This Unit offer 10 ways IEC 320 C13 power jacks and
sturdy whole aluminium alloy.
2.This Unit Can charge a variety of your electronic devices
such as computer,Electric Tool, Household appliances, iPad,
etc
3.One switch provides on and off control for all outlets.
4.Built in circuit breaker to prevent overloads.
5.High quality copper cable, excellent conductivity, safe and
stable.
Specification
OUTPUT | |
Frequency compatibility | 50/60Hz |
Output watts | 2400W |
Output volt amp capacity (amps) | 10A 13A 15A 16A |
Outlet quantity / type | 10*IEC320 C13 |
Outlet spacing | any in. |
INPUT | |
Recommended Electrical Service | 15A 125V/13A 250V/16A 250V/10A 240V |
Input connection type | IEC 320 C14 |
Input plug features | Black or other |
Input cord length (ft.) | 5 to 25 |
Input Housing length (in) | 12-1/4 to 72 |
Input cord gauge, type | 14AWG/3 SJT |
Voltage compatibility (VAC) | 125 |
LAMP ALARMS & SWITCHES | |
Rock Switches with circuit breaker and lamp | Lighted 2 position switch controls power to all outlets |
Locking switch cover | Transparent on/off switch cover prevents accidental turn-off |
PHYSICAL | |
Unit Dimensions (HWL/mm) | 32*60*L/34*43*L |
Material of construction | Aluminum |
Mounting accessories included | Includes mounting clips |
Receptacle Color | Black or other |
AC line cord color | Black or other |
Form factors supported | Supports vertical or horizontal mounting in rack enclosures, raceways, laptops cat and a variety of other applications |
CERTIFICATIONS | |
Power Tap | IEC |
Approved by | CE |
SAFETY WARNING:
Never install this unit during a thunder storm.Installation work of
this unit must be done by a professional, a licensed electrician or
an electric engineer.
Switch off the power before you start installation work.
This unit is for indoor use only.
This unit is not intended for use in or around wet or potentially
wet areas including, but not limited to, aquariums, saunas, showers
and fountains.
Risk of Electric Shock!
INSTALLATION GUIDE:
Before installation, you may need to get a IEC C13 Outlet. Decide
your wire gauge, and ask store attendant for assistance what color
of connectors you should get) from your local hardware or electric
supply or home improvement stores.
Minimum tools required: A fine to medium fine philips screw driver,
and a pair of scissors, and a pair of mid size slip joint pliers
1. Turn off electricity in the house
2. Decide where to place this unit
3. Choose the side you want the cord exit to choose IEC C14 Built in power strips
4. Match the color of the wires and secure the wire connection with proper wire connectors built in IEC C13 plug.(different wire gauge use different colored wire connectors)
Note:
We also custom manufacture for our customers.
