|
[China]
Trade Verify
Address: Room 20E, Block 1-A, Oriental Ginza, No. 48 Dongzhimenwai Avenue, Dongcheng,100007, Beijing, China
Contact name:Lisa Niu
Beijing Zetron Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Ultrasonic Biogas Flowmeter
Commercial and industrial use/ for biogas only BF-3000 Ultrasonic
Biogas Flowmeter is developed for the measurement of biogas output
from anaerobic digester. It is designed to withstand the wet and
corrosive conditions. The built-in temperature and pressure sensors
enable to make compensation and reach high accuracy.The unique
composition reading function requires no additional device and
input, which making it possible to continuously monitor the biogas
quality and quantity with lowest investment.
| General Parameter | |||||||||
| Applicable pipeline | DN32 | DN50 | DN80 | DN100 | DN125 | DN150 | DN200 | DN250 | DN300 |
Flow range(m3/h) | 1.3-65 | 3.2-160 | 4.8-240 | 8-400 | 12-600 | 16-800 | 32-1600 | 48-2400 | 64-3200 |
| Interface | 1"1/4 | 2" | Convex flange | ||||||
| Accuracy range | Class 1.5 | ||||||||
| CH4 composition | Range 30-100%VOL, Accuracyt5%FS | ||||||||
| Power supply | External power supply: Safety Barrier UI-5V, LI-100MA (Main Power Supply) | ||||||||
| Internal Battery :3.6V LS26500(Backup Power Supply) | |||||||||
| Communication | RS-485 | ||||||||
| Explosion levels | ExibIIAT4 Gb | ||||||||
| Protection class | IP65 | ||||||||
• Biogas Anaerobic Digester
• Biogas Flare
• Upgrading Bio-methane Gas
• Biogas generator
Q: When do you reply to messages?
A: We will reply you for your inquiry in 24 hours.
Q: When do you send the products? And how do you send it ?
A: For the small order, we will send out the goods with 5 days,If
have stock ,we will send immediately.
We send them by ups, fedex, tnt or dhl. For big order, normal is 20
days will finish.
Q:Do you accept OEM or revised logo, color, model,size?
A:Yes, we accept OEM for the qualify buyer. We can make the
products according to customer personal requirement.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products
will be fully pre-inspection by QC departments before ,shipping to
you . We have the certification of ISO,CE we could send the
certification test of our company to you.
Q: How about your after-sale service?
A: After sending, we will track the products for you , until you
get the products.
When you got the goods, test them, and give me a feedback.
If you have any questions about the problem, contact with us, we
will offer the solve way for you.
