|
[China]
Trade Verify
Address: Room 20E, Block 1-A, Oriental Ginza, No. 48 Dongzhimenwai Avenue, Dongcheng,100007, Beijing, China
Contact name:Lisa Niu
Beijing Zetron Technology Co., Ltd |
|
Verified Suppliers
|
|
|
High Temperature UV Flue Gas Monitoring System
High Temperature UV Flue Gas Monitoring System Gasboard-9070 is based on advanced UV-DOAS gas analysis technology, which can simultaneously measure the concentration of SO2, NO, NH3 and other gases. It adopts multiple reflection chamber to reach a lower limit of detection. The system adopts high temperature tracing on whole sampling circuit to ensure high measurement accuracy, that can be widely used to monitor the flue gas from industrial stacks or stationary pollution source before and after desulfurization and denitrification, and accurately reflect the conditions of ammonia escaping.
• Adopt UV-DOAS technology to measure SO2, NO, NH3 gas
concentration simultaneously with high accuracy.
• Using multiple reflection gas chamber to provide ultra-low range
measurement and low detection limit.
• High temperature tracing on entire gas flow path, adopting
low-adsorption materials and processing techniques to effectively
avoid the loss of SO2 and NH3.
• Extractive measurement method, not affected by dust, temperature,
and pressure fluctuations in the flue.
• Built-in automatic correction algorithm to eliminate interference
from other gas components.
• Automatic calibration design, easy for operation and maintenance.
• Widely applicable on different applications, not restricted by
on-site installation conditions.
| Performance Parameters | |
| Measuring Component | SO 2 , NO, NH 3 |
| Measuring Principle | UV-DOAS |
| Measurement Range | SO 2 : 1000mg / m 3 ; NO: 100mg / m 3 ; NH 3 : 20mg / m 3 (Outlet of denitration) SO 2 : 50mg / m 3 ; NO: 50mg / m 3 ; The NH 3 : 20mg / m No 3 (Outlet Of a stack) |
| Precision | ≤± 2%F.S. |
| Resolution | 0.1ppm |
| Repeatability | ≤1%F.S. |
| Response Time | T 90 ≤60s |
| Working Parameters | |
| Ambient Temperature | (0~50)°C |
| Power Supply | AC220V, 800W |
| Purge Gas Source | (0.4~0.8)MPa compressed air |
| Interface Signals | |
| Communication | RS485, RS232 |
| Output Mode | 4 channels 4~20mA output 8 channels relay output |
Gas concentration monitoring before and after desulfurization and
denitrification of industrial chimneys and stationary sources of
flue gas, including:
. coal-fired power plants
. Aluminum plants
. Steel plants
. Smelting plant
. Waste-to-energy plants
. Cement plants
. Chemical plants and etc.
Q: What is your terms of payment ?
A:We accept trade assurance, western union ,Visa master card and
tt.
Trade assurance can protect you, when you confirm the product then
the money into my account.
Q: When do you reply to messages?
A: We will reply you for your inquiry in 24 hours.
Q: What is the warranty for your product ?
A: Warranty: 12 months, Lifetime maintenance
Q: When do you send the products? And how do you send it ?
A: For the small order, we will send out the goods with 5 days,If
have stock ,we will send immediately.
We send them by ups, fedex, tnt or dhl. For big order, normal is 20
days will finish.
Q:Do you accept OEM or revised logo, color, model, size?
A:Yes, we accept OEM for the qualify buyer.We can make the products
according to customer personal requirement.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products
will be fully pre-inspection by QC departments before shipping to
you . We have the certification of ISO,CE we could send the
certification test of our company to you.
Q: How about your after-sale service?
A: After sending, we will track the products for you , until you
get the products.
When you got the goods, test them, and give me a feedback.
If you have any questions about the problem, contact with us, we
will offer the solve way for you.
