Active Member
|
[China]
Address: No.2918,Building 6,Yuanjiagang,Chongqing,China
Contact name:Victor
Chongqing Hanfan Technology Co., Ltd. |
|
|
2000-2005 Toyota RAV4 II 2.0 Hydraulic Auto Steering Rack & Pinion Steering Gear Box Repair 44250-42110 44250-42120
 |
Rack & Pinion Steering Gear
| |
| Car Make |
For Toyota RAV4 II 1.8 2.0 2000-2005
| |
| OE | 44250-42110 44250-42120 44200-42120 44250-42040 44250-42080 | |
| Drive Side | LHD (Left-hand drive) | |
| Operating Mode | Hydraulic | |
| Material | Aluminum & rubber | |
| Color | Sliver & Black | |
| MOQ | 20 PCS | |
| Quality | 100% Test | |
| Delivery time | 1-15 days after receive payment | |
| Packing standard | 1. Neutral packing Inner Neutral Bubble bag + Outer Cartons 2. Customized packaging as customers Requirements | |
| Advantages | 1 .OEM standard quality 3. Support customization 4.Strong Packing And supports customization | |
| Contact | Wechat: Cziwan97 Whatsapp : +86-15215082574 Emai :Winnie@benmagroup.com | |
Product Image
More OEM No. for This Steering rack
| 44250-42020 | 44250-42080 | 4425042040 |
| 4425042021 | 4425042100 | 44250-42042 |
| 44250-42040 | 4425042020 | 4425042080 |
| 4425042041 | 44250-42022 | 44250-42120 |
| 44250-42021 | 4425042022 | 44250-42041 |
| 4425042042 | 44250-42100 |
Reference No.
| DELCO REMY : DSR888L | PIM : 37620100N | ERA : SR2888 |
| TRW : JRP797 | LIZARTE : 01.93.2020 | LIZARTE : SR23232 |
| DELCO REMY : DSR1713 | LENCO : SGA370L | SPIDAN : 51870 |
| ELSTOCK : 12-0797 | LIZARTE : 01.93.2050 | TRISCAN : 8510 13426 |
| ERA : SR22056 | PIM : 37620110N | TRW : JRP1143 |
Applicable models
| Vehicle model | Year | Engine | Displacement | power | Type |
| Toyota RAV 4 II (_A2_) 1.8 (ZCA25_, ZCA26_) | 2000-2005 | 1ZZ-FE | 1794 | 92 | SUV |
| RAV 4 II (_A2_) 2.0 4WD (ACA21, ACA20) | 2000-2005 | 1AZ-FE | 1998 | 110 | SUV |
| RAV 4 II (_A2_) 2.0 D 4WD (CLA20_, CLA21_) | 2001-2005 | 1CD-FTV | 1995 | 85 | SUV |
Steering rack structure and working principle:
Steering gear is mainly composed of pinion, rack, adjusting screw,
shell and rack guide block, etc., steering gear pinion in the lower
end of the steering spindle, meshing with the steering rack. When
rotating the steering wheel, the pinion in the steering gear will
rotate, driving the rack in the steering gear to move in the
direction that the steering wheel rotates. The action of the
steering gear rack, through the steering gear rack end and the
steering rod end, is transferred to the steering knuckle arm, so
that the wheel rotates.
How to maintain steering rack:
1. When driving on the bumpy road surface, slow down and reduce the
load borne by the steering rack;
2, often check the dust jacket on both sides of the steering rack
and the dust jacket connected with the upper part of the steering
rack and the universal cross shaft. The breakage of dust jacket is
the main factor leading to the early wear and damage of steering
machine. After the dust jacket is damaged, water and dust and sand
will enter the inside of the steering rack through the broken
place, destroy the grease oil film of the gear rack, resulting in
rust and abnormal wear inside the steering rack. If the internal
water and sand are not dealt with immediately, it will cause the
scrap of the steering rack in a short time. So check the status of
the dust jacket at least once a month, if the dust jacket is found
to be damaged, it must be replaced immediately, and make a
comprehensive inspection and maintenance of the steering rack
before replacement;
3. Before making the four-wheel positioning adjustment and after
changing the steering rod, special attention should be paid to the
phenomenon of distortion and improper assembly of the dust jacket,
otherwise it will cause damage to the dust jacket.
4, due to the use of grease will gradually become dirty,
deterioration, so that the lubrication capacity decreased; At the
same time, the material under the wear will gradually increase, the
abrasive wear phenomenon will be more and more serious, so that the
steering rack wear aggravated. Every 100,000km or so should be done
a comprehensive maintenance of the steering rack, comprehensive
cleaning, re-filling grease;
5. The service conditions of the steering rack are poor and the
load is large. The grease must be used, and the ordinary grease can
not meet the service requirements.
6, steering rack clearance in use will gradually, if the left and
right air travel of the steering wheel is more than 15 degrees, the
steering rack must be checked, such as abnormal wear and tear of
the rack and pinion, must replace the steering rack assembly; If
there is no abnormal wear, but the gap is too large, can be
adjusted. In the adjustment to the service station by the trained
personnel, after adjustment to ensure that the steering wheel can
turn left and right to the limit position, and the force is
uniform, flexible rotation;
7. Do not carry out maintenance and maintenance of steering rack in
roadside shops with simple equipment and low technical level at
will. If the steering rack is not adjusted properly, it will cause
the phenomenon of jamming, endangering driving and personal safety.
Delivery & Packing
More Recommend
Our Company
Advantages
1 OEM quality standard guarantee
2 Competitive factory price
3 Sample order is avaliable
4. Packing according to specification requirred
5 Flexible and convenient logistic service
6 Professional team with excellet after-sales sevice
7 20 years trading experience
8. Positive feedback from abroad and domestic customer
9. We will reply you for your inquiry in 24 hours.
10. after sending, we will track the products for you once every two days, until you get the products. When you got the goods,
test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
Contact
Send inquiry & contact us for more details and competitive price!
Contact Name: Winnie Chen
Email:Winnie@benmagroup.com
Tel/Whatsapp/Wechat +86-15215082574
