Active Member
|
[China]
Address: 7-16, Building 012, No. 26, Fenghuang Shui'an District, Ningbo High-tech Zone,Ningbo, Zhejiang
Contact name:
NINGBO HI-TECH WEDE MOTOR MACHINES CO.,LTD |
|
|
Comparing with the conventional die casting machine, Our automatic rotor die casting machine has following features.
a. labor cost saving, only one operator required, the alumium scrap automatic recycle.
b. safe, it is very easy for operator to run the machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.
c. Healthy, our machine doesn't need asbestine cup to keep the temperature and demould
d. Power saving, and tooling cost is much less and fast tooling changeover.
etc
Machine main function and characteristic
Automatic get aluminium melt liquid,automatic loading rotor (these are for option if customer asked for individually, which is out of standard composition), and unloading the rotor.
Rotor loading: automatic pneumatic circularly pick up. (if customer asked for auto loading)
Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.(if customer asked for auto aluminum liquid filling)
Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.
Automatic feed mold releasing agent, the feeding time and times can be set.
There is water cooling channel, helpful for reducing the mold temperature effectively.
Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.
Machine will alarm and stop working if out of material.
Failure will be automatic displayed and machine will alarm.
One person can take care of more than one machine.(if fully auto machine customer invest)
Apart from the rotor die casting machine, we supply full range machines for stator and rotor manufacturing, such as stator coil winding machine, coil inserting machine, rotor assembly line, rotor turning machine, ect.
We directly and indirectly supply our machines to more than 40 countries, We sincerely wish there is a chance to be of service, make your work easier and reduce your cost!
Application:
Technical Parameters
| No. | Item | Unit | 60T | 70T | 80T |
| I.Main cylinder | |||||
| 1. | Main cylinder mold-lock force | KN | 400 | 400 | 500 |
| 2. | Main cylinder mold-lock stroke | mm | 200 | 300 | 300 |
| II.Injection cylinder | |||||
| 1. | Injection cylinder injecting force | KN | 200 | 300 | 300 |
| 2. | Injecting force(Min-Max) | KN | 70-200 | 70-300 | 70-300 |
| 3. | Injecting cylinder stroke | mm | 150 | 150 | 150 |
| 4. | Accumulator (ACC) | L | 10 | 16 | 20 |
| 5. | Injection plunger OD(max) | mm | 65-75 | 80 | 75-90 |
| 6. | Injection plunger stroke | mm | 50 | 55 | 55 |
| 7. | Aluminum depot capacity(max) | KG | 0.5 | 1 | 1.5 |
| 8. | Cycle time | s | 10 | 15 | 15-20 |
| 9. | Rotor OD(max) | mm | 75 | 80 | 85 |
| 10. | Core length(max) | mm | 70 | 90 | 70 |
| III.Motor and pump | |||||
| 1. | Pump motor power | KW | 7.5 | 7.5 | 7.5 |
| 2. | Divider motor power | KW | 0.2 | 0.2 | 0.75 |
| 3. | Oil pump(plunger pump) | L | 40Y | 40Y | 40Y |
| IV.Machine size | |||||
| 1. | Machine frame(L*W*H) | mm | 1700*1600*2200 | 1700*1600*2200 | 1800*1800*2500 |
| 2. | Oil tank and electric cabinet | mm | 1500*1000*900 | 1500*1000*900 | 1500*1000*900 |
| 3. | Turntable OD | mm | 860 | 860 | 1000 |
| V.Cooling pump | |||||
| 1. | Submersible pump power | KW | 1.1 | 1.1 | 1.1 |
| 2. | Submersible pump flow rate | M3/H | 3.5 | 3.5 | 5 |
| 3. | Submersible pump water pressure | MPa | 0.4 | 0.4 | 0.4 |
Casted rotor photo:
