Custom High Density Forged Tungsten Crucible 99.95% Purity High Purity Tungsten Crucibles Sintered Tungsten Crucible

High Density Forged Tungsten Crucible

1. Description of High Density Forged Tungsten Crucible:
 
The forging process used for forging tungsten crucibles is relatively mature, and the forged tungsten crucibles produced have high density and good performance. The density of the forged tungsten crucible is generally greater than 19.0g/cm3. Because its density almost reaches the ideal theoretical density and the service cycle is long, the tensile strength and high temperature deformation resistance of the forged tungsten crucible will be higher than that of other types of tungsten crucibles. Better performance.
 
2. Size of High Density Forged Tungsten Crucible:
 

3. High Density Forged Tungsten Crucible Manufacturing Process:
 
The preparation of the tungsten crucible by the forging method is mainly completed through three steps. They are billet preparation, forging and machining respectively. In general, the relative density of the billet is 90%-95%. When preparing the billet, the required size and quality of the tungsten rod should be calculated according to the requirements of the finished product. Then the prepared billet, that is, the tungsten rod, is put into a hydrogen furnace for heating, and the temperature should be increased to 1400-1600 °C. After holding for a period of time, forging and forging are carried out, and then the billet is heated and forged several times again until the size of the billet meets the requirements. After the forging is completed, the billet is annealed and then dimensioned according to the requirements of the finished product.
 
4. High Density Forged Tungsten Crucible Benefits:

Company Profile:

Please click below button for learn more our products.