|
Trade Verify
Address: No.1 Qinwang Road, Lintong District, Xi'an, Shannxi, China
Contact name:
Xi'an Lvneng Purification Technology Co.,Ltd. |
|
Verified Suppliers
|
|
Activated Alumina Balls Drying Of Various Liquids Such As Benzene, Carbon, Tetrachloride, Chlorobenzene, Ethyl
Introduction
Activated alumina defluorinated just as the anion exchange resin, but the selectivity is much strong. The
defluorination effect of the actived alumina is good. The capacity is stable, the absorbed fluorine is 6400g/cm3. It has high strength, low abrasion, no soften in water, no expansion, no powdery, no crack. It can widely used in the deep drying of cracked gas, ethylene and propylene,hydrogen-generation, air separation, instrument air drying, and fluorine treatment for H2O2, also in the adsorbing pollution material, such as H2S, SO2, HF and paraffin in the water gas, especially in the drinking water defluorination.
Technical index
| Activated Alumina Desiccant Typical Physical Properties | |||||
| Items | Unit | Value | |||
| Crystalline Phase | χ-ρ | ||||
| Particle Size | mm | 3.0-5.0 | 4.0-6.0 | 5.0-7.0 | 6.0-8.0 |
| Appearance | - | White Sphere | |||
| Bulk Density | g/cm3 | 0.70-0.80 | |||
| Crush Strength | N ≥ | 150 | 180 | 200 | 230 |
| Specific Surface Area | m2/g | 300-330 | |||
| Pore Volume | cm3/g | 0.40-0.50 | |||
| Attrition Rate | wt% ≤ | 0.1 | |||
| Static Water Adsorption | wt% ≥ | 18 | |||
| LOI(1000℃) | - | 4-7 | |||
| AL2O3 | % ≥ | 94 | |||
| SiO2 | % ≤ | 0.02 | |||
| Fe2O3 | % ≤ | 0.02 | |||
| Na2O | % ≤ | 0.20 | |||
| The interval value of the indexes above are on the basis of the different grade of Activated Alumina Desiccant | |||||
Advantages:
1. High Strength, non-toxic, odorless, water-insoluble
2. No bing soft, swelling or fracturing in water
3. Easy renew, long service life
4. Large specific surface, pronounced effect on the defluorination and arsenic-removing, as well as decoloration and deodorization of sewage
Attention:
1. The product cannot be exposed in the open air and should be
stored in dry condition with air-proof package.
2. The product should be regenerated after a certain period of
adsorption. The appropriate regenerated temperature would be better
below 350°C.
Packaging:
1, 25KG/carton; 2, 35KG/carton drum; 3, 150KG/Sealed iron drum
Delivery Time:
About 3-15 days after the payment.
