Guangdong Mytop Lab Equipment Co., Ltd |
|
1. Product
Steel and Wood C Frame Supporting Physical Laboratory School Lab Furniture For Student with 4 seat
2. Who use this
Any phsical laboratory in middle or high school
3. Woktop Options
Work tops material selections are among the most critical of the
laboratory furniture should be considered. The work tops surface
could be exposed to reagents and resistance to a wide range of
acids and alkalies. We can recommend and supply materials to your
individual needs, complete with appropriate sinks, drain and
accessories. Below is sorts of countertops for your selection.
1. Phenolic resin worktops 12.7 mm thickness. Hard; Smooth;
Non-glare surface. Used when ever a high degree of chemical
resistance is required (but not recommend to be used under a high
temperature situation). Resistant to a wide range of acids alkalies
and solvents.
2. Epoxy resin worktops 15; 19, 25mm thickness. Appearance: Hard;
Smooth; Non-glared surface. Not only resistant to a broad range of
acids and alkalies but also can be used under high temperature
situation (below 400 degree).
3. Imported from Netherland; Trespa work tops(13mm; 16mm; 19mm
thickness). Anti-bacteria; Easy to clean and maintain; Resistant to
acids, alkalies and solvents.
4. Ceramic work top: 20mm thickness. Resistant to acids and
alkalies, with a good performance of high-temperature resistance (
can be used in under a high temperature of 2000 degree without any
distorted).
5. Stainless steel work tops: Type 304 furnished as standard. Good
chemical resistance to a wide range of solvents.
4. Laboratory Furniture Consctruction
4.1 Structure: Steel structure and steel- wood structure.
4.2 Frame: "C" frame and "H" frame, by welding the steel tube(60*40*1.5mm)
as the tables supports`frame. The surface of the steel is
acid-washing and powder-coated. With a excellent performance of
resistant to the acid and alkali.
4.3 Doors and drawers panel: Made of 18mm high pressure semi-solid wood(MDF) covered with
0.4mm HPL (High Pressure Laminate) and sealed with 3mm PVC on
edging strips. High quality of 175 degree open hinges, and embedded
aluminum pulls coated with epoxy resin powder.
4.4 Cabinets body panels:: Made of 15mm high pressure semi-solid wood(MDF) covered with 0.4mm
HPL (High Pressure Laminate) and sealed with 3mm PVC on edging
strips. The color of the drawers and cabinets are optional.
4.5 Other accessories on the worktops for the client`s individual
needs:
Regent shelves: Epoxy powder coated; Used 60*30*2mm tube steel to
be the support column. Two layers of 12mm reinforced glass;
Excellent of weight-bearing, solvents resistance. Stainless steel
of guardrails on the both side of the layer to protect the regents
from dropping off.
4.6 PP, ceramic sink and faucets: Anti-acid and alkali, beautifully finished and completed with the
countertops.
Gas valve: Thick copper and epoxy resin-coated. Eye washer; Solid
brass, coating with epoxy resin powder.
Sockets and aluminum duct; Suitable for variety of power supply
system and flexible position change. Special lab socket,
international standard for various of instruments and equipment.
5. Durble Option for All steel Laboratory Furniture
All steel structure | |
Worktops: | 20mm thick ceramic (black) countertops (edge thickened around the sink countertops) or customized. |
Cabinetbody: | 1.0mm thickness of cold-rolled steel sheet production |
Detachable back panel: | 1.0mm thickness of cold-rolled steel sheet production |
Cabinet doors& drawers: | 1.0mm thickness of cold-rolled steel sheet production, surface by the epoxy resin powder coating. |
Hinge: | 175 degree open type high quality hinge. |
Slideway: | Self-closing three section slide rail, no noise. |
Handle: | C-frame alloy with chrome-plating handle |