Active Member
|
[China]
Address: Laser valley, Baoan distrinct, Shenzhen, Guangdong, China.
Contact name:Jason Chen
Shenzhen Future Technology Co., Ltd |
|
|
Fume Extractor For Marking Engraving Portable Lightweight Two Suction Arms Universal Wheels Under
Features:
1.Rapid purification by multi-layer filtration
2.Universal smoking arm, random orientation positioning
3.Special alloy impeller, anti-corrosion, stable operation
4, Multilayer filter design,make sure more thorogh purification
Instructions:
| Power(W) | 150 |
| Dimension(mm) | 340*265*480 |
| Air Flow(m3/h) | 220 |
| Noise(db) | <57 |
| Voltage | 110/220 |
| No-load speed(r/min) | 5800 |
| Wind spped(m/s) | 17 |
| Weight(kg) | 11 |
| Negative pressure(pa) | 1800 |
Advantages:
1.Multi layer filtration, rapid purification, filter failure sound and light alarm.
2.Low cost basis: as low as 1.85 yuan / day (8 hours / day)
3. Long service life, low cost, continuous 24-hour work, can use 40000 hours (i.e. normal use for eight to ten years)
4, Multilayer filter design,make sure more thorogh purification
5,Brushless DC moter,stable long service life
FAQ:
Q:Can it be used in extremely humid or corrosive environment?
A:No, because in a particularly humid environment, moisture or corrosive gas will damage the filter element and the internal components of the machine; but usually in spring, humid weather, such as "southerly days", will not affect the use.
Q:Can it be used in high temperature environment?
A:The high temperature should be divided into instantaneous high temperature and long-term high temperature, the temperature within 60 degrees can be used; the temperature over 60 degrees for a long time is not recommended, because it may lead to fire.
Q:When the filter element needs to be replaced, will it give an alarm?
A:The indicator light of digital display control panel will flash red light and give out alarm sound.
Q:Can the pipe of smoke and dust move back and forth with the laser head?
A:In principle, it can, but it can't if auxiliary gas is needed
Q:Can water cutting match your purifier?
A:No, because the humidity of the gas and dust inhaled by the air inlet is 40% - 80%, too high humidity will cause the filter element to fail quickly and the circuit inside the machine to be damaged.
Product part picture:
