|
[China]
Trade Verify
Address: TaiZhong Industrial Building Ai Lian LongGang District, Shenzhen, Guangdong, China
Contact name:Jena
Shenzhen Sacon Telecom Co., Ltd |
|
Verified Suppliers
|
|
|
South America 23dBm Mobile Signal Amplifier CDMA 800Mhz ALC Function Design
Descriptions:
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use. This GSM 850Mhz signal repeater SA-23S-CDMA can cover max 1000 m2, it is South America standard.
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great
cover.
Expansion and extention of the signal of base station.
Optimization of the quality of the signal and source
3. Cover about max 1000m² without block or obstruct.
4. High linear design, ALC function design, low interference to
BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
Antenna isolation testing,Prevent the oscillation
Specifications
| Frequency Range | Uplink | Downlink | |||
| CDMA 800Mhz | 824 - 849MHz | 869- 894MHz | |||
| Max. Gain | 60 - 70dB | 65 - 75dB | |||
| Max. Output Power | 14 - 20dBm | 17 - 24dBm | |||
| Band width | Wide Band | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| Automatic Gain Control | >20dB | ||||
| Ripple in-band | ≤ 6dB | ||||
| Return loss | ≤ -10dB | ||||
| Noise Figure | ≤ 6dB | ||||
| Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
| Modulation Accuracy | ≤ 12.5% | ||||
| Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Power Supply | AC100-240V,DC9V/3A | ||||
| Power LED | Power indicator | ||||
| ISO LED | Red | Autoexcitation or High Power | |||
| Green | Standard | ||||
| AGC LED | Off | Low Power or No power | |||
| Green | Standard | ||||
| Red | Full Signal, ALC On | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Impedance | 50 ohm | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -10°C~55°C | ||||
| Environment Conditions | IP40 | ||||
| Size | 204mm×128mm×27mm | ||||
| Weight | 1.5 Kg | ||||
Application:
To expand signal coverage of fill signal blind area where signal is
weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking
Lots, etc.
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Standard Package:
1) AC 90-264V,DC 6V/3A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
5) CDMA 850Mhz mobile signal booster 1PCS
