|
[China]
Trade Verify
Address: TaiZhong Industrial Building Ai Lian LongGang District, Shenzhen, Guangdong, China
Contact name:Jena
Shenzhen Sacon Telecom Co., Ltd |
|
Verified Suppliers
|
|
|
Triple Band Outdoor Mobile Signal Repeater 10W High Power Multiband 2G 3G 4G
Description:
800 1800 2600MHz Tri band Repeater 2G 3G 4G Multiband Cell Phone Repeater Amplifier for outdoor coverage system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
2G capabilities: GSM 850, GSM 900, GSM 1800 GSM 1900
3G capabilities: UMTS 850, UMTS 900 UMTS 1900, UMTS 2100
4G capabilities: LTE 700, LTE 800, LTE 1700, LTE 1900, LTE 2100, LTE 2300 , LTE 2600
Network coverage - 2G/3G/4G mobile networks
Technical Specification:
| Item | 800 1800 2600MHz Tri band Repeater 2G 3G 4G Multiband Cell Phone Repeater Amplifier
| ||
| Frequency Range | Uplink |
890-915MHz / 1710-1785MHz / 1920-1980MHz
| |
| Downlink |
935-960MHz / 1805-1880MHz / 2110-2170MHz
| ||
Output Power | Uplink |
+33dBm
| |
| Downlink |
+40dBm
| ||
| Working Bandwidth |
Various bandwidth is available upon request
| ||
| Gain |
Min. 90dB-95db
| ||
| Gain Control Range |
31dB (1dB Step)
| ||
| VSWR |
< 1.5
| ||
| Ripple in Band |
Max +/- 1.5dB
| ||
Spurious Emissions | 9KHz-1GHz |
Max -36dBm
| |
| 1GHz-12.75GHz | Max -30dBm | ||
| ACPR |
≤-45dBc
| ||
≤-55dBc
| |||
| RF Connector |
N-type Female
| ||
| I/O Impedance |
50 ohm
| ||
| Noise Figure |
Max 5dB
| ||
| Group Time Delay |
Max 5µS
| ||
| Temperature Range |
-25 degree Celsius to +55 degree Celsius
| ||
| Relative Humidity |
Max 95%
| ||
| MTBF |
Min. 100000 hrs
| ||
| Power Supply |
DC -48V / AC220V (+/-15%), 50Hz
| ||
| UPS Backup Power Supply (Optional) | 6 hours / 8 hours | ||
| Power Consumption |
Max 250W
| ||
| NMS Monitor Function |
Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power, Gain, Uplink ATT, Downlink ATT and etc.
| ||
| Remote Control Module (Optional) |
RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery
| ||
Application:
800 1800 2600MHz Tri band Repeater 2G 3G 4G Multiband Cell Phone Repeater Amplifier to expand signal coverage of signal blind areas where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
